Abstract
The rising potential for battery energy storage systems (BESS) to generate revenue in a market environment is addressed in this work, where a tool based on neural network predictions is proposed. The tool's main objective is predicting, based on historical data, the most lucrative out of three established bidding approaches for the participation of a BESS in the day-ahead energy market and thus aid the strategic bidding process of the BESS operator. Each of these bidding strategies reflects BESS's operator approach concerning bidding frequency and the tolerated risk of loss of profit from having its bids rejected, leading to the development of a conservative (strategy A), an aggressive (strategy B), and a moderate strategy (strategy C). A case study was then used to test the tool for a full year allowing to ascertain the assertiveness of this tool in predicting the best strategy, which for this case was above 88%.

Abstract
The decarbonisation of the building sector is crucial for Portugal's goal of achieving economy-wide carbon neutrality by 2050. To mobilize communities towards energy efficiency measures, it is important to understand the primary drivers and barriers that must be overcome through policymaking. This paper aims to review existing Energy Policies and Actions (EPA) in Portugal and assess their effectiveness in improving Energy Efficiency (EE) and reducing CO2 emissions in the building sector. The Local Energy Planning Assistant (LEPA) tool was used to model, test, validate and compare the implementation of current and alternative EPAs in the North of Portugal, including the national EE plan. The results indicate that electrification of heating and cooling, EE measures, and the proliferation of Renewable Energy Sources (RES) are crucial for achieving climate neutrality. The study found that the modelling of alternative EPAs can be improved to reduce investment costs and increase Greenhouse Gas (GHG) emissions reduction. Among the alternatives assessed, the proposed one (Alternative 4) presents the best returns on investment in terms of cost savings and emissions reduction. It allows for 52% investment cost savings in the residential sector and 13% in the service sector when compared to the current national roadmap to carbon neutrality (Alternative 2). The estimated emission reduction in 2050 for Alternative 4 is 0.64% for the residential sector and 3.2% for the service sector when compared to Alternative 2.

Abstract
Energy communities have been designed to empower consumers while maximizing the self-consumption of local renewable energy sources (RESs). Their presence in distribution systems can result in strong modifications in the operation and management of such systems, moving from a centralized operation to a distributed one. In this scope, this work proposes a distributed community-based local energy market that aims at minimizing the costs of each community member, accounting for the technical network constraints. The alternating direction method of multipliers (ADMM) is adopted to distribute the market, and preserve, as much as possible, the privacy of the prosumers' assets, production, and demand. The proposed method is tested on a 10-bus medium voltage radial distribution network, in which each node contains a large prosumer, and the relaxed branch flow model is adopted to model the optimization problem. The market framework is proposed and modeled in a centralized and distributed fashion. Market clearing on a day-ahead basis is carried out taking into account actual energy exchanges, as generation from renewable sources is uncertain. The comparison between the centralized and distributed ADMM approach shows an 0.098% error for the nodes' voltages. The integrated OPF in the community-based market is a computational burden that increases the resolution of the market dispatch problem by about eight times the computation time, from 200.7 s (without OPF) to 1670.2 s. An important conclusion is that the proposed market structure guarantees that P2P exchanges avoid the violation of the network constraints, and ensures that community agents' can still benefit from the community-based architecture advantages.

Abstract
Isolated power systems with high shares of renewables can require additional inertia as a complementary resource to assure the system operation in a dynamic safe region. This paper presents a methodology for the day-ahead Unit Commitment/ Economic Dispatch (UC/ED) for low-inertia power systems including dynamic security constraints for key frequency indicators computed by an Artificial Neural-Network (ANN)-supported Dynamic Security Assessment (DSA) tool. The ANN-supported DSA tool infers the system dynamic performance with respect to key frequency indicators following critical disturbances and computes the additional synchronous inertia that brings the system back to its dynamic security region, by dispatching Synchronous Condensers (SC) if required. The results demonstrate the effectiveness of the methodology proposed by enabling the system operation within safe frequency margins for a set of high relevance fault type contingencies while minimizing the additional costs associated with the SC operation.

Abstract
This work models a distributed community-based market with diverse assets (photovoltaic generators and energy storage systems), accounting for network constraints and adopting the relaxed branch flow model. The market is modeled in a single and fully distributed approach, employing the alternating direction method of multipliers (ADMM) to prevent voltage and line capacity problems in the community network and improve data privacy and reduce the communication burden. Different scenarios, based on the penalty term and the agents' number, are tested to study the efficiency of the algorithm and the convergence rate of the ADMM distributed model. The proposed method is tested on 10-bus, 22-bus, and 33-bus medium voltage radial distribution networks, where each node contains a large prosumer with one or several assets. One important conclusion is that the implemented residual balancing technique improves the efficiency of the ADMM distributed algorithm by increasing the convergence rate and reducing the computational time.

Abstract
As prosumers and energy communities gain prominence in power systems, energy trading between prosumers in local P2P markets is paramount. Within this novel market design, peers can directly exchange energy with each other, leading to economic advantages while supporting the decarboniza-tion of the sector. To ensure that voltage and congestion issues are properly addressed, a thorough coordination between the P2P market and the Distribution System Operator is required. This paper presents and compares three mutual-benefit coordination methods. The first method entails applying product differentiation on an iterative basis to avoid exceeding the lines thermal limits, which is performed through penalties on P2P exchanges that may be overloading the network. The second method uses the P2P market with an AC-OPF, ensuring network operation through a flexibility market via upward and downward flexibility. The last one proposes an integrated operation of the P2P market with AC-OPF. All methods are assessed in a typical distribution network with high prosumers integration. The results show that the second method is the one that, fulfilling the network constraints, presents greater social welfare.& COPY; 2023 Elsevier Ltd. All rights reserved.