Abstract
The detection of glucose is crucial for diagnosing diseases such as diabetes and enables timely medical intervention. In this study, a disposable enzymatic screen-printed electrode electrochemical biosensor enhanced with machine learning (ML) for quantifying glucose in serum is presented. The platinum working surface was modified by chemical adsorption with biographene (BGr) and glucose oxidase, and the enzyme was encapsulated in polydopamine (PDP) by electropolymerisation. Electrochemical characterisation and morphological analysis (scanning and transmission electron microscopy) confirmed the modifications. Calibration curves in Cormay serum (CS) and selectivity tests with chronoamperometry were used to evaluate the biosensor's performance. Non-linear ML regression algorithms for modelling glucose concentration and calibration parameters were tested to find the best-fit model for accurate predictions. The biosensor with BGr and enzyme encapsulation showed excellent performance with a linear range of 0.75-40 mM, a correlation of 0.988, and a detection limit of 0.078 mM. Of the algorithms tested, the decision tree accurately predicted calibration parameters and achieved a coefficient of determination above 0.9 for most metrics. Multilayer perceptron models effectively predicted glucose concentration with a coefficient of determination of 0.828, demonstrating the synergy of biosensor technology and ML for reliable glucose detection.

Abstract
This paper focuses on the modeling, control, and simulation of an over-actuated hexacopter tilt-rotor (HTR). This configuration implies that two of the six actuators are independently tilted using servomotors, which provide high maneuverability and reliability. This approach is predicted to maintain zero pitch throughout the trajectory and is expected to improve the aircraft's steering accuracy. This arrangement is particularly beneficial for precision agriculture (PA) applications where accurate monitoring and management of crops are critical. The enhanced maneuverability allows for precise navigation in complex vineyard environments, enabling the unmanned aerial vehicle (UAV) to perform tasks such as aerial imaging and crop health monitoring. The employed control architecture consists of cascaded proportional (P)-proportional, integral and derivative (PID) controllers using the successive loop closure (SLC) method on the five controlled degrees of freedom (DoFs). Simulated results using Gazebo demonstrate that the HTR achieves stability and maneuverability throughout the flight path, significantly improving precision agriculture practices. Furthermore, a comparison of the HTR with a traditional hexacopter validates the proposed approach.

Abstract
In the era of Industry 4.0, fault tolerance is essential for maintaining the robustness and resilience of industrial systems facing unforeseen or undesirable disturbances. Current methodologies for fault tolerance stages namely, detection, diagnosis, and recovery, do not correspond with the accelerated technological evolution pace over the past two decades. Driven by the advent of digital technologies such as Internet of Things, cloud and edge computing, and artificial intelligence, associated with enhanced computational processing and communication capabilities, local or monolithic centralized fault tolerance methodologies are out of sync with contemporary and future systems. Consequently, these methodologies are limited in achieving the maximum benefits enabled by the integration of these technologies, such as accuracy and performance improvements. Accordingly, in this paper, a collaborative fault tolerance methodology for cyber-physical systems, named Collaborative Fault * (CF*), is proposed. The proposed methodology takes advantage of the inherent data analysis and communication capabilities of cyber-physical components. The proposed methodology is based on multi-agent system principles, where key components are self-fault tolerant, and adopts collaborative and distributed intelligence behavior when necessary to improve its fault tolerance capabilities. Experiments were conducted focusing on the fault detection stage for temperature and humidity sensors in warehouse racks. The experimental results confirmed the accuracy and performance improvements under CF* compared with the local methodology and competitiveness when compared with a centralized approach.

Abstract
The reliability and robustness of cyber-physical systems (CPS) are critical aspects of the current industrial landscape. The high level of autonomous and distributed components associated with a large number of devices makes CPS prone to faults. Despite their importance and benefits, traditional fault tolerance methodologies, namely local and/or centralized, often overlook the potential benefits of collaboration between cyber-physical components. This paper introduces a collaborative fault diagnosis methodology for CPS, integrating self-fault diagnosis capabilities in agents and leveraging collaborative behavior to enhance fault diagnosis. The contribution of this paper relay in propose a methodology for fault diagnosis for CPS, based on multi-agent system (MAS) technology as a backbone of infra-structure, highlighting the components, agent behavior, functionalities, and interaction protocols, to explore the benefits of communication and collaboration between agents. The proposed methodology enhance the accuracy of fault diagnosis when compared with local approach. A case study was conducted in a laboratory-scale warehouse, focusing on diagnosing drift, bias, and precision faults in temperature and humidity sensors. Experimental results reveal that the collaborative methodology significantly outperforms the local approach in fault diagnosis, as evidenced by performance improvements in diagnosis classification. The statistical significance of these results was validated using the Wilcoxon signed-ranks test for paired samples. © 2013 IEEE.

Abstract

Abstract
One of the industry’s most common applications of lasers is engraving, which is generally performed on flat surfaces. However, there are many situations where the object to be engraved has an unevenly curved geometry. In those cases, the light power density will be different along the surface for a fixed head, leading to a poor engraving result. This work deals with this problem by designing a robotic application capable of detecting variations on the object surface and automatically creating a trajectory to engrave on it correctly. This was made possible through a robotic manipulator, a time-of-flight distance sensor, and a data processing algorithm over the measured data. Obtained results were acquired using a custom-made test rig and validated by delivering consistent engraving results on irregular surface shapes.