Abstract
A reflection configuration setup for long-period fiber gratings is presented. It permits to obtain a unique band with attenuation double than that obtained in transmission configuration, which is interesting for applications where this value is reduced (e. g., the mode transition phenomenon). The method is based on the deposition of a silver mirror at the end of the optical fiber, which permits to absorb the power transmitted through cladding modes and to avoid the generation of interferometric bands. The method also solves the requirement of a precise cleave or to polish the end of the grating, a drawback present in other publications. The versatility of the setup has been proved by application of the cladding etching technique until the attenuation band corresponding with the first guided mode in the cladding is visualized in an optical spectrum analyzer. The experimental results are supported by the numerical data obtained with a method based on the exact calculation of core and cladding modes and the utilization of coupled mode theory.

Abstract
In this work, we reviewed the most important achievements of INESC TEC related to the fabrication of long-period fiber gratings using the electric arc technique. We focused on the fabrication setup, the type of fiber used, and the effect of the fabrication parameters on the gratings' transmission spectra. The theory was presented, as well as a discussion on the mechanisms responsible for the formation of the gratings, supported by the measurement of the temperature reached by the fiber during an electric arc discharge.

Abstract
In this work, we review the most important achievements of INESC TEC related to the properties and applications of arc-induced long-period fiber gratings. The polarization dependence loss, the spectral behavior at temperatures ranging from cryogenic up to 1200 degrees C and under exposure to ultraviolet and gamma radiation is described. The dependence of gratings sensitivity on the fabrication parameters is discussed. Several applications in optical communications and sensing domains are referred.

Abstract
In this paper, we investigate modification of transmission spectra of long-period fiber grating structures with an acoustic shock front propagating along the fiber. We simulate transmission through inhomogeneous long-period fiber gratings, pi-shift and reflective pi-shift gratings deformed by an acoustic shock front. Coupled mode equations describing interaction of co-propagating modes in a long-period fiber grating structures with inhomogeneous deformation are used for the simulation. Two types of apodization are considered for the grating modulation amplitude, such as uniform and raised-cosine. We demonstrate how the transmission spectrum is produced by interference between the core and cladding modes coupled at several parts of the gratings having different periods. For the pi-shift long-period fiber grating having split spectral notch, the gap between the two dips becomes several times wider in the grating with the acoustic wave front than the gap in the unstrained grating. The behavior of reflective long-period fiber gratings depends on the magnitude of the phase shift near the reflective surface: an additional dip is formed in the 0-shift grating and the short-wavelength dip disappears in the pi-shift grating.

Abstract
In this work, we review the most important achievements of an INESC TEC long-period-grating-based fiber optic Michelson and Mach-Zehnder configuration modal interferometer with coherence addressing and heterodyne interrogation as a sensing structure for measuring environmental refractive index and temperature. The theory for Long Period Grating (LPG) interferometers and coherence addressing and heterodyne interrogation is presented. To increase the sensitivity to external refractive index and temperature, several LPG interferometers parameters are studied, including order of cladding mode, a reduction of the fiber diameter, different type of fiber, cavity length and the antisymmetric nature of cladding modes.

Abstract
In this paper, we investigated the evolution of the dispersion curves of long-period fiber gratings (LPFGs) from room temperature down to 0 K. We considered gratings arc-induced in the SMF28 fiber and in two B/Ge co-doped fibers. Computer simulations were performed based on previously published experimental data. We found that the dispersion curves belonging to the lowest-order cladding modes are the most affected by the temperature changes, but those changes are minute when considering cladding modes with dispersion turning points (DTP) in the telecommunication windows. The temperature sensitivity is higher for gratings inscribed in the B/Ge co-doped fibers near DTP and the optimum grating period can be chosen at room temperature. A temperature sensitivity as high as -850 pm/K can be obtained in the 100-200 K temperature range, while a value of -170 pm/K is reachable at 20 K.