Abstract
Renewable sources of energy play a decisive role in the current energetic paradigm to mitigate climate changes associated with greenhouse gases emissions and problems of energy security. Biomass energy and in particular forest wood biomass supply chains have the potential to enhance these changes due to its several benefits such as ability to produce both bioenergy and bioproducts, generate energy on-demand, among others. However, this energy source has some drawbacks mainly associated with the involved costs. In this work, the use of a Model Predictive Control approach is proposed to plan, monitor and control the wood-biomass supply chain for energy production at a tactical level. With this methodology the biomass supply chain becomes more efficient ensuring the service quality in a more competitive way. In order to test and validate the proposed approach different simulation scenarios were considered that proved the efficiency of the proposed tool regarding the decisions definition and control.

Abstract
At the present time there is a high prebure toward the improvement of all the production procebes. Those improvements can be sensed in several directions in particular those that involve energy efficiency. The definition of tight energy efficiency improvement policies is transversal to several operational areas ranging from industry to public services. As can be expected, agricultural procebes are not immune to this tendency. This statement takes more severe contours when dealing with indoor productions where it is required to artificially control the climate inside the building or a partial growing zone. Regarding the latter, this paper presents an innovative system that improves energy efficiency of a trees growing platform. This new system requires the control of both a water pump and a gas heating system based on information provided by an array of sensors. In order to do this, a multi-input, multi-output regulator was implemented by means of a Fuzzy logic control strategy. Presented results show that it is pobible to simultaneously keep track of the desired growing temperature set-point while maintaining actuators streb within an acceptable range. © Copyright 2015 by SCITEPRESS - Science and Technology Publications, Lda.

Abstract

Abstract
Positioning and orientation precision of a multirotor aerial robot can be increased by using additional control loops for each of the driving units. As a result, one can eliminate lack of balance between true thrust forces. A control performance comparison of two proposed thrust controllers, namely robust controller designed with coefficient diagram method (CDM) and proportional, integral and derivative (PID) controller tuned with pole-placement law, is presented in the paper. The research has been conducted with respect to model/plant matching uncertainty and with the use of anti-windup compensators for a simple motor-rotor model approximated by first-order inertia plus delay. From the obtained simulation results one concludes that appropriate choice of AWC compensator improves tracking performance and increases robustness against parametric uncertainty.

Abstract
This work addresses the problem of finding the best controller parameters in order to improve the response of a single degree-of-freedom structural system under earthquake excitation. The control paradigm considered is based on brain emotional learning (BEL) and the actuation over the building dynamics is carried out by changing the stiffness of a magneto-rheological damper. A typical BEL-based controller requires the definition of several parameters which can prove difficult and non-intuitive to obtain. For this reason, an evolutionary-based search technique has been added to the current problem framework in order to automate the controller design. In particular, the particle swarm optimization method is chosen as the evolutionary based technique to be integrated within the current control paradigm. The obtained results suggest that, indeed, it is possible to parametrize a BEL controller using an evolutionary-based algorithm. Moreover, a simulation shows that the obtained results can outperform the ones obtained by manual tuning each controller parameter individually.

Abstract
This paper evaluates a robust Model Predictive Controller (MPC) based on Sliding Modes (SMPC) for the downstream level control in irrigation canal pools. Its features are compared with the conventional Generalized Predictive Controller (GPC), regarding set point tracking (water level) and output disturbances (offtake discharges). Simulation results suggest feasibility of applying SMPC for gate manipulation, with suitable command signals and robustness.