Abstract
Optical fiber optrodes are attractive sensing devices due to their ability to perform point measurement in remote locations. Mostly, they are oriented to biochemical sensing, quite often relying on fluorescent and spectroscopic techniques, but with the refractometric approach being also considered when the objective is high measurement performance, particularly when focusing on measurand resolution. In this work, we address this subject proposing and theoretically analyzing the characteristics of a fiber optic optrode relying on plasmonic interaction. The optrode structure is a fiber optic tapered tip layout incorporating a lateral bimetallic layer (silver + gold) and operating in reflection.

Abstract
Optical fiber sensors based on the phenomenon of plasmonic resonance can be interrogated applying different methods, the most common one being the spectral approach where the measurand information is derived from the reading of the wavelength resonance dip. In principle, a far better performance can be achieved considering the reading of the phase of the light at a specific wavelength located within the spectral plasmonic resonance. This approach is investigated in this work for fiber optic SPR sensors with overlays which are combinations of metallic and dielectric thin films, permitting not only to tune the wavelength of the SPR resonance but also the sensitivity associated with the phase interrogation of the sensors.

Abstract
The recent burst of R&D activity in Plasmonics, associated with the possibility of materials nanostructuring which enables the access to metamaterials, has been strongly impacting many branches of optics such as imaging, data recording and sensing. This talk details the factors that turned the combination Plasmonics and Metamaterials a huge opportunity to optical sensing.© OSA 2014.

Abstract
An analytical model based on geometrical optics and multilayer transfer matrix method is applied to determine the sensing properties of tapered optical fiber based SPR sensors incorporating bimetallic (Gold and Silver) layers, particularly when phase interrogation is considered. Phase interrogation is studied as a methodology to attain enhanced sensitivities. The performance of the sensing heads as function of the bimetallic layers and taper parameters is analyzed. It is shown the bimetallic combination is capable to provide larger values of sensitivity compared with the single layer approach. The results derived from this study are guiding the experimental study of these structures.

Abstract
It is proposed the multiplexing of optical fiber-based surface plasmon resonance (SPR) sensors deployed in a ladder topology, addressed in wavelength by combining each sensor with specific fiber Bragg gratings (FBGs) and considering intensity interrogation. In each branch of the fiber layout, the FBGs are located after the sensor and the peak optical power reflected by the FBGs is a function of the relative spectral position between the SPR sensor and the FBG resonances, with the former dependent on the refractive index of the surrounding medium. The concept is tested for the multiplexing of two SPR sensors fabricated in an etched region of a single-mode fiber showing intrinsic refractive index sensitivity up to 5000 nm/RIU, which translates into a sensitivity of similar to 829 dB/RIU from the interrogation approach considered. The obtained refractive index resolution is in the order of 10(-4) RIU, and the crosstalk level between the sensors was found negligible.

Abstract
Optical fiber optrodes are attractive sensing devices due to their ability to perform point measurement in remote locations. Mostly, they are oriented to biochemical sensing, quite often supported by fluorescent and spectroscopic techniques, but with the refractometric approach considered as well when the objective is of high measurement performance, particularly when the focus is on enhancing the measurand resolution. In this work, we address this subject, proposing and analyzing the characteristics of a fiber optic optrode relying on plasmonic interaction. A linearly tapered optical fiber tip is covered by a double overlay: the inner one - a silver thin film and over it a dielectric layer, with this combination allowing to achieve, at a specific wavelength range, surface plasmonic resonance (SPR) interaction sensitive to the refractive index of the surrounding medium. Typically, the interrogation of the SPR sensing structures is performed, considering spectroscopic techniques, but in principle, a far better performance can be obtained, considering the reading of the phase of the light at a specific wavelength located within the spectral plasmonic resonance. This is the approach which is studied here in the context of the proposed optical fiber optrode configuration. The analysis performed shows the combination of a silver inner layer with a dielectric titanium oxide layer with tuned thicknesses enables sensitive phase reading and allows the operation of the fiber optic optrode sensor in the third telecommunication wavelength window.