Abstract
Palladium-based fiber-optic sensors have been one of the most promising configurations for hydrogen sensing. In the latest decade, fiber-optic sensors have indeed earned a strong interest owing to their ability to monitor molecular hydrogen at specific spatial points-either as a sensing tip device or in large areas via multiple sensing regions distributed along the optical fiber. This review focuses on the various types of optical fiber hydrogen sensors, containing specifically palladium as active element. Three distinct working principles are described, viz. interferometric-, intensity-, and fiber grating-based sensors; their characteristics and sensing performances are critically overviewed.

Abstract
In this Letter, a hybrid interferometer for simultaneous measurement of the partial pressures of O-2 and CO2 mixtures is reported. The sensing head consists in the combination of two interferometric structures, one a Fabry-Perrot cavity and the other a modal interferometer. The intrinsic Fabry-Perot was formed by splicing a single mode fiber with a graded index fiber length that was then subjected to chemical etching creating an air cavity. The second interferometer is based on a splice of a pure silica tube in series with the Fabry-Perot. It was observed for a particular gas that its refractive index changes with pressure variation in a specific way, a characteristic that permitted the simultaneous measurement of partial pressures of CO2 and O-2 with rms deviations of similar to +/- 48.7 kPa and similar to +/- 20.1 kPa, respectively. (C) 2012 Optical Society of America

Abstract
In this work, we analyze a remote optical sensor system based on Raman amplification, composed by one Long Period Grating (LPG) as a sensor head, separated by 50 km from the optical source, and the interrogation unit composed by two Fiber Bragg Gratings (FBGs) modulated by two Piezoelectrics Transductors (PZTs). Optical fiber sensor systems are typically limited to operate at distances of only few kilometers due to the attenuation effects and noise present in the optical fiber that adversely affects the performance of the sensor interrogation process. We present experimental and simulated results obtained in the context of the analysis of remote optical fiber sensors. The simulation models compute the Raman interaction between the pumps and the sensor signals and allow speeding up the analyses regarding the setup to be experimentally implemented in order to measure/monitor environmental temperature. Experimental results obtained in the implemented setup show that under Raman amplification the power ratio between the two central wavelengths of the FBGs has a linear relation with the change of the LPG resonance induced by environmental temperature.

Abstract
It is reported a long-period grating (LPG) dynamic interrogation technique based on the modulation of fiber Bragg gratings located in the readout unit of the system. It permits to attenuate the effect of the 1/f noise of the electronics in the resolution of the LPG-based sensing head. The concept is tested to detect variations of the external refractive index and a resolution of 2.0 x 10(-4) NIR was achieved without system optimization. Additionally, the effect in the sensor resolution when introducing Erbium and Raman optical amplification is experimentally investigated.

Abstract
In our study, remote environmental sensing is presented using a standard optical time domain reflectometer (OTDR). The measurement of environmental parameters using optical sensors is an expanding area of research with growing importance. Fiber optic sensors are an interesting solution for that due to their high sensitivity, small size, and capability for on-site, real-time, remote, and distributed sensing capabilities. Our multiplexing sensing scheme approach uses transmissive filters (long period gratings - LPGs) interrogated by the OTDR return pulses. The loss induced at the resonance wavelengths varies with changes in the environment refractive index, temperature or other physical parameters. Experimental results show that the insertion of an erbium amplifier improves the measurement resolution in certain situations. Further analysis show that a remote multiplexed sensing scheme allows us to perform simple and low cost real time measurement of refractive index and temperature over long distances.

Abstract
An electrical dynamic interrogation technique previously reported by the authors for long-period grating sensors is now progressed by relying its operation exclusively on the modulation of a DFB Laser. The analysis of the detected first and second harmonic generated by the electrical modulation of the DFB Laser allows generating an optical signal proportional to the LPG spectral shift and resilient to optical power fluctuations along the system. This concept permits attenuating the effect of the 1/f noise of the photodetection, amplification and processing electronics on the sensing head resolution. This technique is employed in a multiplexing sensing scheme that measures refractive index variations.