Abstract
A fiber optic sensor based on a long-period grating (LPG) inscribed in a photonic crystal fiber is investigated for vibration sensing for structural monitoring applications. In this paper, preliminary results are shown demonstrating the sensor ability to detect vibration induced in a test structure. The sensor frequency response when attached to a loudspeaker-acrylic plate stimulation system (tested in the range from 40 Hz to 2.5 kHz) is analyzed using an intensity based scheme with a tunable laser. An alternative interrogation scheme, where the vibration signal is retrieved from a spectral scan, is also demonstrated and analyzed showing promising characteristics for structural health monitoring.

Abstract
A novel optical fiber sensor is presented for measuring dissolved CO2 for water quality monitoring applications, where the optical signal is based either on refractive index changes or on color change. The sensing chemistry is based on the acid-basic equilibrium of 4-nitrophenol, that is converted into the anionic form by addition quaternary ammonium hydroxide. The CO2 sensitive layer was characterized and tested by using simple absorbance/reflectance measurement setups where the sensor was connected to a fiber optic CCD spectrometer. A prototype simulating a real shallow raceway aquaculture system was developed and its hydraulic behavior characterized. A commercially available partial-pressure-NDIR sensor was used as a reference for dissolved CO2 tests with the new optical fiber sensor under development. Preliminary tests allowed verifying the suitability of the new optical sensor for accurately tracking the dissolved carbon dioxide concentration in a suitable operation range. Direct comparison of the new sensor and the reference sensor system allowed to demonstrate the suitability of the new technology but also to identify some fragilities there are presently being addressed.

Abstract
In this work the implementation of an optical fiber interferometric system for differential thermal analysis enabling the identification of chemical species is described. The system is based on a white light Mach-Zehnder configuration using pseudo-heterodyne demodulation to interrogate two identical fiber Bragg gratings (FBG) in a differential scheme. System performance is compared using either standard hardware or low cost virtual instrumentation for operation control and signal processing. The operation with the virtual system enabled temperature measurements with a +/-0.023 degrees C resolution nearly matching the performance of the standard hardware. The system ability to discriminate chemical species by differential thermal analysis was demonstrated. Mixed samples of acetone and methanol could be successfully identified, indicating the suitability of the system for high precision measurements using low cost instrumentation. (C) 2013 American Institute of Physics. [http://dx.doi.org/10.1063/1.4774054]

Abstract
This paper discusses the calculation of the trapping forces in optical tweezers using a combination of the finite differences time domain (FDTD) method and the Lorentz force on electric dipoles. The results of 2D simulations of the trapping of a circular particle by a waveguide with a circular tip are presented and discussed. © 2012 The Author(s).

Abstract
A magneto-optical current sensor, based on a low birefringence SF57 glass prism, using a dual quadrature polarimetric configuration was implemented and tested aiming its application in high voltage power lines. Sensor operation is characterized and compared using distinct Super Luminescent Diodes as optical sources, with emission at 650 nm, 830 nm and 1550 nm. Calibration and resolution are obtained in the different operating conditions using a DAQ board and full digital control for signal acquisition and processing. In particular, the sensor was tested in the range from 0 to 1 kA at 50 Hz. Also, operation at different frequencies from 50 Hz to 400 Hz was compared. A robust casing was fabricated in Nylon material enabling the portability of the sensor and its application in different types of conductors. Preliminary results indicate the feasibility of using the sensor both for metering and protection applications in high-power lines with interrogation via the OPGW cable.

Abstract
One of the major issues in the modeling of subwavelength optical materials resides in how to compute the effective properties of such media. An efficient technique must be able to describe appropriately the electromagnetic response of the overall structure. Within this context, this work is focused on the calculation of effective parameters of metallic silver nanowires embedded in alumina background. An algorithm based on modal propagation is considered in order to estimate the refractive index at the visible spectrum. The resonances obtained in the computing model are compared to the predictions of analytical Bruggeman and Maxell-Garnett theories and analyzed by regarding excitation of surface modes at the metal-dielectric interface.