Abstract
A magnetic field sensor using a non-adiabatic tapered optical fiber (NATOF) interacting with magnetic fluid (MF) nanoparticles is proposed and experimentally demonstrated. The NATOF is surrounded by a MF whose RI changes with external magnetic field which MF is as a cladding of tapered fiber. The Output interference spectrum is shifted by the change of the applied magnetic field intensity in the range up to 44 mT with a sensitivity of -7.17x10(-2) nm/ mT.

Abstract
A novel magnetic field sensor using a nonadiabatic tapered optical fiber (NATOF) interacting with magnetic fluid (MF) nanoparticles is proposed and experimentally demonstrated. The NATOF sensitivity when is subjected to refractive index (RI) measurement in the small range from 1.3380 to 1.3510 was 1260.17 nm/RIU as a refractometer sensor. The NATOF is surrounded by a MF whose RI changes with external magnetic field, which MF is as a cladding of tapered fiber. The output interference spectrum is shifted by the change of the applied magnetic field intensity in the range up to 44 mT with a sensitivity of -7.17 x 10(-2) nm/mT, used only 0.1% of the volume concentration of MF nanoparticles. This direct manipulation of light with magnetic fields provides an approach to develop future sensors relying on electromagnetic interactions.

Abstract
In this study, the authors present an experimental and theoretical description of the use of first order Raman amplification to improve the performance of a Phase-sensitive optical time domain reflectometer (phi OTDR) when used for vibration measurements over very long distances. A special emphasis is given to the noise which is carefully characterized and minimized along the setup. A semiconductor optical amplifier and an optical switch are used to greatly decrease the intra-band coherent noise of the setup and balanced detection is used to minimize the effects of RIN transferred from the Raman pumps. The sensor was able to detect vibrations of up to 250 Hz (close to the limits set by the time of flight of light pulses) with a resolution of 10 m in a range of 125 km. To achieve the above performance, no post-processing was required in the fOTDR signal. The evolution of the fOTDR signal along the fiber is also shown to have a good agreement with the theoretical model.

Abstract
This communication describes an optical hands-on fiber laser experiment aimed at advanced college courses. Optical amplifiers and laser sources represent very important optical devices in numerous applications ranging from telecommunications to medicine. The study of advanced photonics experiments is particularly relevant at undergraduate and master level. This paper discusses the implementation of an optical fiber laser made with a cavity built with two tunable Bragg gratings. This scheme allows the students to understand the laser working principles as a function of the laser cavity set-up. One or both of the gratings can be finely tuned in wavelength through applied stress; therefore, the degree of spectral mismatch of the two gratings can be adjusted, effectively changing the cavity feedback. The impact of the cavity conditions on the laser threshold, spectrum and efficiency is analyzed. This experiment assumes that in a previous practice, the students should had already characterized the erbium doped fiber in terms of absorption and fluorescent spectra, and the spectral gain as a function of pump power.

Abstract

Abstract
An intrinsic fiber optic dosimeter (FOD) targeted to nuclear applications is presented. The proposed real-time dosimeter provides dose information based on the historic record over time of the effects of ionizing radiation on single-and multi-mode pure silica fibers, and also on PMMA plastic fibers. The effect of Co-60 gamma irradiation on optical links based on silica and plastic fibers were assessed, considering thermal environment effects over a wide range of variation of the operating parameters. Cerenkov radiation and radiation-induced absorption effects were in focus. The corresponding distortion and spectral transmission degradation were evaluated over wide range of the operating parameters. Radiation induced attenuation (RIA) has shown a spectral band dependent behaviour up to 840 Gy dose levels. The performance of different fibers was assessed against the performance of non-irradiated fibers. From the measurements of dose rate and total dose imparted by ionizing radiation in the fibers we verified that fibers with radiation resistance issues showed wavelength-dependent radiation sensitivity increasing with dose rate. Upon evaluation of correlations between the total dose, the induced loss at various dose rates and different wavelengths, it was concluded that intrinsic fiber dosimeters can be used for dose rates in the range 4 - 28 Gy/min., typical of severe radiation environments.