Sanaa Finich

Abstract
A comparative analysis of Ka and D-band unit cells is presented using a Waveguide Simulator and infinite array models with a Floquet port. Initially, a single-unit cell design is employed with a tapered transition section. Subsequently, a 1 × 2-unit cell is designed and integrated into standard rectangular waveguides WR-34 and WR-7. For the Ka-band, the results obtained from both models exhibit excellent agreement in terms of magnitude and phase. In the D-band, the 1 × 2-unit cell demonstrated low loss for both techniques, and the phase responses were reasonably accurate with differences of less than 40 degrees. At such high frequencies (145-175 GHz), the Waveguide Simulator offers a viable solution for assessing the behavior of the unit cell without the need for a full array. © 2025 European Association on Antennas and Propagation.

Abstract
A low-cost single-layer substrate-integrated waveguide (SIW) cavity-backed slot antenna is proposed for millimeter-wave applications. The structure is designed to operate at the W-band. The T-shaped slot antenna is placed on the back-side of the SIW and fed by a grounded coplanar waveguide (GCPW) transmission line. A transition between the (GCPW) and the SIW is also designed. The simulated results provide that the antenna has a stable gain over the frequency range (98.79-100.56) GHz with a maximum value of around 6 dBi also high radiation efficiency.