Abstract
A novel sensing head for simultaneous measurement of strain and temperature is demonstrated, based on two Bragg gratings arranged in a twisted configuration. Choosing an appropriate twisting period, the grating resonance wavelengths show similar temperature sensitivities but different strain responses, permitting simultaneous discrimination of these parameters with rms deviations of +/- 1.5 degrees C and +/- 4.7 mu epsilon respectively.

Abstract

Abstract
Organic-inorganic hybrids were prepared using ureapropyltriethoxysilane, methacryloxypropyltrimethoxysilane and acrylic acid modified zirconium(IV) n-propoxide precursors and were characterized by small angle X-ray scattering, X-ray diffraction and photoluminescence spectroscopy. The results indicate an effective interaction between the zirconium-based nanoparticles and the siliceous nanodomains that induces changes in the hybrids' emission features. Planar waveguides were obtained by spin-coating of the prepared sols on sodalime and silica substrates. Refractive index, thickness, number of propagating modes, and attenuation coefficient were measured at 543.5, 632.8 and 1550 nm by the prism coupling technique. The synergism between the two hybrid precursors resulted in monomode planar waveguides with low losses in the infrared ( from 0.6-1.1 dB cm(-1)) which also support a number of propagating modes in the visible ( losses from 0.4-1.5 dB cm(-1)). Channel waveguides were also obtained by UV photopatterning using amplitude or phase masks and propagating modes were observed at 1550 nm.

Abstract

Abstract
A compact sensor able to discriminate between temperature and strain related effects was implemented. The proposed sensing head comprises a single long-period grating with two sections written consecutively in the SMF-28 fiber, by the electric arc discharge technique, using different fabrication parameters. The sensor performance is based on the distinct temperature and strain sensitivity values presented by two neighbor resonances belonging to each grating section. The temperature and strain resolutions are +/- 0.1 degrees C and +/- 40 mu epsilon, respectively.

Abstract
Hybrid sol-gel technology has proved its usefulness in the field of micro-optics. Indeed, it makes it possible to manufacture optical microcomponents by processes much simpler than those currently used, particularly when photopatternable materials are employed. However, for wavelengths in the near infrared window (NIR), this process is confronted with a major problem which results from the significant optical absorption of this type of materials, in particular around 1550 nm. The aim of this paper is to describe the origin of the losses of some hybrid sol-gel materials of direct interest in micro-device fabrication in order to propose solutions to achieve a greater transparency in the NIR region. The intrinsic absorption of the precursors was first of all considered since it is crucial to pursue the final goal of decreased losses. Then, the principal parameters of the sol-gel synthesis were studied. Among them, the thermal treatment conditions, the hydrolysis ratio and the controlled addition of transition metal alkoxides allow an improvement of the material transparency, at 1550 nm most particularly. This last point was considered with the highest attention, and NIR and NMR spectroscopies were employed to explain how the addition of zirconium alkoxides at the end of the reaction makes it possible to considerably decrease the losses in the material.