Abstract
Due to the exponential increase in energy consumption and CO2 emissions, new sustainable energy sources have emerged, and hydrogen (H2) is one of them. Despite all the advantages, H2 has high flammability, so constant monitoring is essential. Two optical techniques were numerically studied and compared with the goal of H2 sensing: surface plasmon polaritons (SPP) and Tamm plasmon polaritons (TPP). The H2-sensitive material used was palladium (Pd) in both techniques. The SPP structure was found to have more sensitivity to H2 than TPP, 23 and 5nm/4vol% H2, respectively. However, the latter has lower FWHM, with the minimum of the band showing reflectivity near 0%. In addition, TPP also uses more cost-effective materials and can be interrogated at normal incidence with depolarized light. The potential of using each of these optical techniques for H2 sensing was demonstrated. © The Authors.

Abstract
This article proposes a methodology for high loss detection in LV network, based on a very small set of commonly available data/metadata from networks connected to an MV/LV substation. The approach is based on a combination of predictors from several distinct categories, including network data, metadata, and measured smart meter data. Several independent groups of unranked real networks were simulated, and it was possible to find the top ten networks with the highest level of losses with a very satisfactory success rate (76% to 98%), depending on selected groupings folds. Due to the impracticability of analyzing all LV networks, the identification of the highest loss ones is essential for the definition of loss reduction planning since, with this list filtering, it is possible to determine with a good degree of certainty which networks require maintenance or upgrade.

Abstract
The advent of Industry 4.0 has created a need for more flexible and adaptable manufacturing systems. This paper proposes the integration of AAS (Asset Administration Shells), SBM (Skill-based manufacturing) and OPC UA (Open Platform Communications Unified Architecture), to enable more flexible manufacturing systems. The integration of these concepts provides a solution for achieving faster and easier dynamic reconfiguration in manufacturing systems, which is essential for fulfilling the demand of customization and flexibility in modern production systems. An Asset Administration Shell provides a standardized structure for describing assets and their administration, while Skill-based manufacturing enables the deployment of task-oriented machines that can self-configure, self-diagnose, and self-optimize their performance. The use of OPC UA as a communication protocol ensures that these systems can communicate with one another in a secure and reliable way. This paper presents a conceptual framework for the integration of these three open technologies. This framework contributes to having a single interface and source of information for every asset, which can lead to increased efficiency by reducing changeover times, thus reducing the overall cost in flexible manufacturing system scenarios. Future work will focus on the implementation and validation of this framework in a real-world manufacturing setting.

Abstract
Exploiting stronger winds at offshore farms leads to a cyclical need for maintenance due to the harsh maritime conditions. While autonomous vehicles are the prone solution for O&M procedures, sub-sea phenomena induce severe data degradation that hinders the vessel's 3D perception. This article demonstrates a hybrid underwater imaging system that is capable of retrieving tri-dimensional information: dense and textured Photogrammetric Stereo (PS) point clouds and multiple accurate sets of points through Light Stripe Ranging (LSR), that are combined into a single dense and accurate representation. Two novel fusion algorithms are introduced in this manuscript. A Joint Masked Regression (JMR) methodology propagates sparse LSR information towards the PS point cloud, exploiting homogeneous regions around each beam projection. Regression curves then correlate depth readings from both inputs to correct the stereo-based information. On the other hand, the learning-based solution (RHEA) follows an early-fusion approach where features are conjointly learned from a coupled representation of both 3D inputs. A synthetic-to-real training scheme is employed to bypass domain-adaptation stages, enabling direct deployment in underwater contexts. Evaluation is conducted through extensive trials in simulation, controlled underwater environments, and within a real application at the ATLANTIS Coastal Testbed. Both methods estimate improved output point clouds, with RHEA achieving an average RMSE of 0.0097 m -a 52.45% improvement when compared to the PS input. Performance with real underwater information proves that RHEA is robust in dealing with degraded input information; JMR is more affected by missing information, excelling when the LSR data provides a complete representation of the scenario, and struggling otherwise.

Abstract
Digitalization has begun as a transformative force within the energy sector, reforming traditional practices and paving the way for enhanced operational efficiency and sustainability. Enabled by key technologies such as smart meters, digitalization embodies a paradigm shift in energy management. Nonetheless, it is crucial to recognize that these enabling technologies are only the catalysts and not the end goal. This paper presents a comprehensive overview of digital services and products in the energy sector, with a specific focus on emerging technologies like AI and Connected Data Spaces. The objective of this review paper is to assess the maturity and adoption levels of these digital solutions, seeking to draw insights into the factors influencing their varying levels of success. This maturity and adoption assessment was carried out by applying a Fuzzy logic approach which allowed us to compensate for the lack of detailed information in current literature. By analyzing the reasons behind high maturity-low adoption and vice-versa, this study seeks to cast light on the dynamics shaping the digital transformation of the energy sector.

Abstract
Energy allocation rules are one of the core aspects of collective self-consumption (CSC) regulations. It allows final consumers to share their surplus generation with other CSC members, while keeping their full rights as consumers, i.e., maintaining a supply contract with the retailers of their choice. Some European Union member states regulations use allocation coefficients so that local allocations are integrated with wholesale settlement and directly affect the retailers' billing. Several AC methods have been proposed so far, each one adapted to distribution system operators' settlement procedures with specific rules that can impact the benefits that each CSC member obtain. This paper analyses, assesses and compares two relevant AC methods, namely pre-delivery fixed AC and post-delivery dynamic AC, by developing a settlement formulation for a community with members with flexible assets and different opportunity costs. AC policy recommendations based on findings are provided.