Abstract
The concept of underwater docking stations has long been proposed to support the long term deployment of AUVs, but the number of successful solutions is still very disappointing. Hovering type AUVs can navigate arbitrarily slow, simplifying the docking maneuver and the requirements for the receiving structure. This paper describes a docking system that was developed to extend the mission duration of the MARES AUV, a man portable hovering type AUV. Given the wide range of operational scenarios and configurations of this AUV, one of the design requirements was to have a simple modular structure, that could easily be reconfigured to support different vehicle configurations, deployment scenarios and docking maneuvers. The paper provides details of the mechanical aspects, the onboard electronic subsystems, and the general operational procedure, as well as preliminary data from the first trials. © 2017 IEEE.

Abstract
Traditional coverage path planners create lawnmower-type paths in the operating area completely ignoring the uncertainty in the vehicle's position. However, in the presence of significant uncertainty in localization estimates, one can no longer guarantee that the vehicle will cover all the area according to plan. Aiming to bridge this gap, we present a coverage path planning technique for search operations which takes into account the vehicle's position and detection performance uncertainties and tries to minimize this uncertainty along the planned path. The objective is to plan paths, using a localization error model as input, to reduce as much uncertainty as possible and to minimize the extra path length (swath overlap) while satisfying mission feasibility constraints. We introduce an algorithm that calculates what will be the best moments for bringing the vehicle to surface to ensure a bounded position error. We also consider time and energy constraints that may influence the planned trajectory as path overlap is increased to account for uncertainty. Additionally we challenge the assumption frequently seen in coverage algorithms where two observations of the same target are considered independent. © 2017 IEEE.

Abstract
In this article we introduce a method to estimate the water current in AUV operation scenarios. The method is based on reciprocal sound transmission between pairs of acoustic navigation beacons, with a minimum of three beacons being required to obtain an estimate of both current velocity and direction. We analyse the sensitivity of the current estimation with respect to the geometry of the beacon location. We demonstrate the applicability of the method with a case study.

Abstract
Autonomous Underwater Vehicles are remarkable machines that revolutionized the collection of data at sea. There are many examples of highly operational man-portable vehicles for shallow waters, but there was no similar solution for deep water operations. This paper describes the development of a portable, modular, hovering AUV for deep water operations. The vehicle has little over 50kg, 2.4m of length, and a depth rating of 4000m. The first version of the vehicle has been assembled, it has gone through the initial tests in water tanks, and it is being prepared for the first operations at sea. © 2017 Marine Technology Society.

Abstract
One of the most common ways of collecting ocean data is to deploy sensors from the surface, allowing to understand the variation of water properties with depth. Autonomous vertical profilers are robotic vehicles that replace human operators in this task. They form a particular class of autonomous underwater vehicles that move predominantly along the vertical axis, typically with reduced control on the horizontal axis. This paper describes a propeller driven autonomous underwater profiler, optimized for shallow waters. The vehicle has no fins or other control surfaces, and uses four independent thrusters to provide both vertical and horizontal motion, including hovering in the water column. The paper describes the main subsystems, including the hardware implementation, the software structure, and the motion controllers, with experimental data from the first trials. © 2017 Marine Technology Society.

Abstract
FLEXUS unmanned surface vehicle was designed in the context of the Internet of Moving Things. This small catamaran weights less than 15kg and is less than 1m long, making it a very convenient vehicle with reduced logistics needs for operations in real outdoor environments. The present paper describes the resulting system both in terms of design and performances. Based on the requirements for this project, the subsystems composing the vehicle are described. Results obtained from experiments conducted in outdoor conditions have successfully validated this design and are presented in this paper.