Abstract
In-situ calibration of marine sensors requires close-range positioning. In turn, localization relative to a given object of interest is necessary. This paper deals with the detection of a vertical cable hanging from a marine observatory implemented by means of a moored buoy. An algorithm composed of sequential image filtering, segmentation and template matching is proposed. Two approaches for generating the cable's acoustic image template are introduced. The performance of the approaches, obtained by comparison with ground-truth measurements, are illustrated over challenging cluttered acoustic images collected in a test tank. The results indicate a performance better than 74% of the best candidate to match the actual cable.

Abstract
As humanity progresses and globalization advances, humanized environment and associated systems increase in complexity and size. In earth systems, oceans represent an essential element of equalization and normal functioning. Ocean-atmospheric interactions are nowadays believed to be at the heart of all earth vital signs and climatic behaviours, and therefore are essential to accurate monitoring and understanding of earth systems. The work presented is a preliminary result of the K2D- Knowledge and Data from the Deep to Space, project which addresses the challenge of creating underwater network nodes to provide power and communication to land through the submarine fiber optic cable repeaters. The N2ODE system will consist of a set of subsystems that will allow continuous monitoring and interaction with fixed and mobile underwater devices.

Abstract
Wall and other planar structures are common in environments as harbors, marinas, or dams. In this paper we introduce an algorithm aimed at the identification of these structures through acoustic images retrieved from an imaging sonar, building on an application of the Hough Transform algorithm. We employ a polar-based line parametric model for improved computational efficiency and further adapt the core Hough Transform blocks to the characteristics of acoustic imaging. The developed solution was subjected to experimental tests employing acoustic data acquired in a water tank, from different viewpoints and under different sonar gain configurations.

Abstract
Long-term and reliable marine ecosystems monitoring is essential to address current environmental issues, including climate change and biodiversity threats. The existing oceans monitoring systems show clear data gaps, particularly when considering characteristics such as depth coverage or measured variables in deep and open seas. Over the last decades, the number of fixed and mobile platforms for in situ ocean data acquisition has increased significantly, covering all oceans' regions. However, these are largely dependent on satellite communications for data transmission, as well as on research cruises or opportunistic ship surveys, generally presenting a lag between data acquisition and availability. In this context, the creation of a widely distributed network of SMART cables (Science Monitoring And Reliable Telecommunications) - sensors attached to submarine telecommunication cables - appears as a promising solution to fill in the current ocean data gaps and ensure unprecedented oceans health continuous monitoring. The K2D (Knowledge and Data from the Deep to Space) project proposes the development of a persistent oceans monitoring network based on the use of telecommunications cables and Autonomous Underwater Vehicles (AUVs). The approach proposed includes several modules for navigation, communication and energy management, that enable the cost-effective gathering of extensive oceans data. These include physical, chemical, and biological variables, both registered with bottom fixed stations and AUVs operating in the water column. The data that can be gathered have multiple potential applications, including oceans health continuous monitoring and the enhancement of existing ocean models. The latter, in combination with geoinformatics and Artificial Intelligence, can create a continuum from the deep sea to near space, by integrating underwater remote sensing and satellite information to describe Earth systems in a holistic manner.

Abstract
This work presents a six degrees of freedom probabilistic scan matching method for registration of 3D underwater sonar scans. Unlike previous works, where local submaps are built to overcome measurement sparsity, our solution develops scan matching directly from the raw sonar data. Our method, based on the probabilistic Iterative Correspondence (pIC), takes measurement uncertainty into consideration while developing the registration procedure. A new probabilistic sensor model was developed to compute the uncertainty of each scan measurement individually. Initial displacement guesses are obtained from a probabilistic dead reckoning approach, also detailed in this document. Experiments, based on real data, demonstrate superior robustness and accuracy of our method with respect to the popular ICP algorithm. An improved trajectory is obtained by integration of scan matching updates in the localization data fusion algorithm, resulting in a substantial reduction of the original dead reckoning drift.

Abstract
A growing interest in ocean exploration for scientific and commercial research has been shown, mainly due to the technological developments for maritime and offshore industries. The use of Autonomous surface vehicles (ASV) have a promising role to revolutionize the transportation, monitorization, operation and maintenance areas, allowing to perform distinct task from offshore assets inspection to harbor patrolling. This work presents SENSE, an autonomouS vEssel for multi-domaiN inSpection and maintEnance. It provides an open-source hardware and software architecture that is easy to replicate for both research institutes and industry. This is a multi-purpose vehicle capable of acquiring multi-domain data for inspecting and reconstructing maritime infrastructures. SENSE provides a research platform which can increase the situational awareness capabilities for ASVs. SENSE full configuration provides multimodal sensory data acquired from both domains using a Light Detection And Ranging (LiDAR), a stereoscopic camera, and a multibeam echosounder. In addition, it supplies navigation information obtained from a real-time kinematic satellite navigation system and inertial measurement units. Moreover, the tests performed at the harbor of Marina de Leca, at Porto, Portugal, resulted in a dataset which captures a fully operational harbor. It illustrates several conditions on maritime scenarios, such as undocking and docking examples, crossings with other vehicles and distinct types of moored vessels. The data available represents both domains of the maritime scenario, being the first public dataset acquired for multi-domain observation using a single vehicle. This paper also provides examples of applications for navigation and inspection on multi-domain scenarios, such as odometry estimation, bathymetric surveying and multi-domain mapping.