Abstract
Recent developments in dexterous robotic manipulation technologies allowed for the design of very compact, yet capable, multi-fingered robotic hands. These can be designed to emulate the human touch and feel, reducing the aforementioned need for human expertise in highly detailed tasks. The presented work focused on the application of two simulation platforms Gazebo and MuJoCo - to a use-case of a Schunk Five Finger Robotic Hand, coupled to the UR5 collaborative manipulator. This allowed to assess the relative appropriateness of each of these platforms.

Abstract
Special care must be taken when considering robots designed to operate collaboratively, such as a swarm, to prevent these agents from being damaged due to unwanted collisions. This work proposes integrating techniques used to move robots, using the Robot Operating System (ROS) and Python's Scikit-Fuzzy module. Thus, this work developed a fuzzy-controlled collaborative obstacle avoidance system for a type of robot whose dynamics are based on motors' vibration. Thus, these robots were designed to participate in a swarm, and the collision must be avoided. In the search for navigation stability, optimal values were sought for the engines' pulse width modulation (PWM).

Abstract
Autonomous UAVs offer advantages in industrial, agriculture, environment inspection, and logistics applications. Sometimes the use of cooperative UAVs is important to solve specific demands or achieve productivity gain in these applications. An important technical challenge is the precise positioning between two or more UAVs in a cooperative task flight. Some techniques provide solutions, like the GNSS positioning, visual and LIDAR slam, and computer vision intelligent algorithms, but all these techniques present limitations that must be solved to work properly in specific environments. The proposal of new cooperative position methods is important to face these challenges. The present work proposes an evaluation of a visual relative positioning architecture between two small UAV multi-rotor aircraft working in a master-slave operation, based on an Augmented Reality tag tool. The simulation results obtained absolute error measurements lower than 0.2 cm mean and 0.01 standard deviation for X, Y and Z directions. Yaw measurements presented an absolute error lower than 0.5 degrees C with a 0.02-5 degrees C standard deviation. The real-world experiments executing autonomous flight with the slave UAV commanded by the master UAV achieved success in 8 of 10 experiment rounds, proving that the proposed architecture is a good approach to building cooperative master-slave UAV applications.

Abstract
The exponential growth in energy demand is leading to massive energy consumption from fossil resources causing a negative effects for the environment. It is essential to promote sustainable solutions based on renewable energies infrastructures such as microgrids integrated to the existing network or as stand alone solution. Moreover, the major focus of today is being able to integrate a higher percentages of renewable electricity into the energy mix. The variability of wind and solar energy requires knowing the relevant long-term patterns for developing better procedures and capabilities to facilitate integration to the network. Precise prediction is essential for an adequate use of these renewable sources. This article proposes machine learning approaches compared to an hybrid method, based on the combination of machine learning with optimisation approaches. The results show the improvement in the accuracy of the machine learning models results once the optimisation approach is used. © 2023 - IOS Press. All rights reserved.

Abstract
The future is envisaged to have renewable energy resources replacing conventional sources of energy like fossil fuels. In this direction wind and solar energy is emerging to be a vital source of green energy. Although these resources are a promising aspect in providing clean and cheap electrical energy, one demerit is that it is intermittent and therefore unpredictable. This intermittent nature poses a challenge in maintaining the balance between generation and demand of electrical energy thus adversely affecting the system control. Also, the electrical energy companies involved in selling by participating in the electricity pool market need highly accurate solar and wind energy predictions for maximizing their profit. These issues demand a tool for accurate prediction of generation. This paper proposes machine learning prediction models for wind and solar irradiation. For this, a case study is done considering weather data of Malviya National Institute of Technology in Jaipur used to train the regression models. The best-trained model is tested with unseen data and shown to have reasonably good accuracy in predicting wind speed and solar irradiation. A comparative study of regression model performances is done. It is shown that Gaussian Process Regression-based prediction for solar irradiation and the Support Vector Machine outperforms the trained model for the wind speed predictions. © 2023, The Author(s), under exclusive license to Springer Nature Switzerland AG.

Abstract
Unmanned aerial vehicles (UAV) are a suitable solution for monitoring growing cultures due to the possibility of covering a large area and the necessity of periodic monitoring. In inspection and monitoring tasks, the UAV must find an optimal or near-optimal collision-free route given initial and target positions. In this sense, path-planning strategies are crucial, especially online path planning that can represent the robot's operational environment or for control purposes. Therefore, this paper proposes an online adaptive path-planning solution based on the fusion of rapidly exploring random trees (RRT) and deep reinforcement learning (DRL) algorithms applied to the generation and control of the UAV autonomous trajectory during an olive-growing fly traps inspection task. The main objective of this proposal is to provide a reliable route for the UAV to reach the inspection points in the tree space to capture an image of the trap autonomously, avoiding possible obstacles present in the environment. The proposed framework was tested in a simulated environment using Gazebo and ROS. The results showed that the proposed solution accomplished the trial for environments up to 300 m3 and with 10 dynamic objects.