Abstract
The Beninar Dam, located in Southeastern Spain, is an earth-fill dam that has experienced filtration issues since its construction in 1985. Despite the installation of various monitoring systems, the data collected are sparse and inadequate for the dam's lifetime. The present research integrates Multi-Temporal Interferometric Synthetic Aperture Radar (MT-InSAR) and dam modeling to validate the monitoring of this dam, opening the way to enhanced integrated monitoring systems. MT-InSAR was proved to be a reliable and continuous monitoring system for dam deformation, surpassing previously installed systems in terms of precision. MT-InSAR allowed the almost-continuous monitoring of this dam since 1992, combining ERS, Envisat, and Sentinel-1A/B data. Line-of-sight (LOS) velocities of settlement in the crest of the dam evolved from maximums of -6 mm/year (1992-2000), -4 mm/year (2002-2010), and -2 mm/year (2015-2021) with median values of -2.6 and -3.0 mm/year in the first periods (ERS and Envisat) and -1.3 mm/year in the Sentinel 1-A/B period. These results are consistent with the maximum admissible modeled deformation from construction, confirming that settlement was more intense in the dam's early stages and decreased over time. MT-InSAR was also used to integrate the monitoring of the dam basin, including critical slopes, quarries, and infrastructures, such as roads, tracks, and spillways. This study allows us to conclude that MT-InSAR and dam modeling are important elements for the integrated monitoring systems of embankment dams. This conclusion supports the complete integration of MT-InSAR and 3D modeling into the monitoring systems of embankment dams, as they are a key complement to traditional geotechnical monitoring and can overcome the main limitations of topographical monitoring.

Abstract
In Portugal, almonds are a very important crop, due to their nutritional properties. In the northeastern part of the country, the almond sector has endured over time, with strong cultural traditions and key economic significance. In these areas, several cultivars are used. In effect, the presence of various almond cultivars implies differentiated management in irrigation, disease control, pruning system, and harvest planning. Therefore, cultivar classification is essential over large agricultural areas. Over the last decades, remote-sensing data have led to important breakthroughs in the classification of different cultivars for several crops. Nonetheless, for almonds, studies are incipient. Thus, this study aims to fill this knowledge gap and explore the classification of almond cultivars in an almond orchard. High-resolution multispectral data were acquired by an unmanned aerial vehicle (UAV). Vegetation indices (VIs) and tree structural parameters were, subsequently, estimated. To obtain an accurate cultivar identification, four machine learning classifiers, such as K-nearest neighbour (kNN), support vector machine (SVM), random forest (RF), and extreme gradient boosting (XGBoost), were applied and optimized through the fine-tuning process. The accuracy of machine learning classifiers was analysed. SVM and RF performed best with OAs of 76% and 74% using VIs and spectral bands (GREEN, GRVI, GN, REN, ClRE). Adding the canopy height model (CHM) improved performance, with RF and XGBoost having OAs of 88% and 84%. kNN performed worst with an OA of 73% using only VIs and spectral bands, 80% with VIs, spectral bands and CHM, and 93% with VIs, CHM, and tree crown area (TCA). The best performance was achieved by RF and XGBoost with OAs of 99% using VIs, CHM, and TCA. These results demonstrate the importance of the feature selection process. Moreover, this study reveals the feasibility of remote-sensing data and machine learning classifiers in the classification of almond cultivars.

Abstract
Grape moths are a significant pest in vineyards, causing damage and losses in wine production. Pheromone traps are used to monitor grape moth populations and determine their developmental status to make informed decisions regarding pest control. Smart pest monitoring systems that employ sensors, cameras, and artificial intelligence algorithms are becoming increasingly popular due to their ability to streamline the monitoring process. In this study, we investigate the effectiveness of using segmentation as a pre-processing step to improve the detection of grape moths in trap images using deep learning models. We train two segmentation models, the U-Net architecture with ResNet18 and InceptionV3 backbonesl, and utilize the segmented and non-segmented images in the YOLOv5s and YOLOv8s detectors to evaluate the impact of segmentation on detection. Our results show that segmentation preprocessing can significantly improve detection by 3% for YOLOv5 and 1.2% for YOLOv8. These findings highlight the potential of segmentation pre-processing for enhancing insect detection in smart pest monitoring systems, paving the way for further exploration of different training methods.

Abstract
Grape varieties play an important role in wine's production chain, its identification is crucial for controlling and regulating the production. Nowadays, two techniques are widely used, ampelography and molecular analysis. However, there are problems with both of them. In this scenario, Deep Learning classifiers emerged as a tool to automatically classify grape varieties. A problem with the classification of on-field acquired images is that there is a lot of information unrelated to the target classification. In this study, the use of segmentation before classification to remove such unrelated information was analyzed. We used two grape varieties identification datasets to fine-tune a pre-trained EfficientNetV2S. Our results showed that segmentation can slightly improve classification performance if only unrelated information is removed.

Abstract
Bogota, the largest urban center and capital city of Colombia, is located within the Bogota savanna, which originated as a lake in the central part of the Colombian Eastern Cordillera. Over time, the lake transformed into a gently undulating plain with horizontally deposited sediments that formed around five million years ago. Over the last few decades, the region has undergone significant population growth and rapid urban development, largely driven by migration from rural areas. This development has substantially impacted the subsidence observed in the city, primarily due to the extraction of groundwater. A previous study by the Servicio Geologico Colombiano (SGC) utilized data from GNSS stations and synthetic aperture radar interferometry (InSAR) with TerraSAR-X SAR between 2011 and 2017 to identify a subsidence pattern in the central region of Bogota. The purpose of the study was to evaluate the risks and potential disasters associated with the subsidence phenomenon. Our study investigates both the subsidence in Bogota, previously studied, as well as the rural savanna area, which is currently undergoing significant residential and industrial development. We utilized multi-temporal InSAR (MT-InSAR) techniques with Sentinel-1 SAR images from 2014 to 2021. The analysis results indicate that the outer regions of the city display the most significant subsidence, extending from the center to the north. The subsidence velocities in these areas reach approximately 5-6 cm/year.

Abstract
Global warming presents a significant threat to the sustainability of agricultural systems, demanding increased irrigation to mitigate the impacts of prolonged dry seasons. Efficient water management strategies, including deficit irrigation, have thus become essential, requiring continuous crop monitoring. However, conventional monitoring methods are laborious and time-consuming. This study investigates the potential of aerial imagery captured by unmanned aerial vehicles (UAVs) to predict critical water stress indicators-relative water content (RWC), midday leaf water potential (psi MD), stomatal conductance (gs)-as well as the pigment content (chlorophyll ab, chlorophyll a, chlorophyll b and carotenoids) of trees in an olive orchard. Both thermal and spectral vegetation indices are calculated and correlated using linear and exponential regression models. The results reveal that the thermal vegetation indices contrast in estimating the water stress indicators, with the Crop Water Stress Index (CWSI) demonstrating higher precision in predicting the RWC (R2 = 0.80), psi MD (R2 = 0.61) and gs (R2 = 0.72). Additionally, the Triangular Vegetation Index (TVI) shows superior accuracy in predicting the chlorophyll ab (R2 = 0.64) and chlorophyll a (R2 = 0.61), while the Modified Chlorophyll Absorption in Reflectance Index (MCARI) proves most effective for estimating the chlorophyll b (R2 = 0.52). This study emphasizes the potential of UAV-based multispectral and thermal infrared imagery in precision agriculture, enabling assessments of the water status and pigment content. Moreover, these results highlight the vital importance of this technology in optimising resource allocation and enhancing olive production, critical steps towards sustainable agriculture in the face of global warming.