Cookies
O website necessita de alguns cookies e outros recursos semelhantes para funcionar. Caso o permita, o INESC TEC irá utilizar cookies para recolher dados sobre as suas visitas, contribuindo, assim, para estatísticas agregadas que permitem melhorar o nosso serviço. Ver mais
Aceitar Rejeitar
  • Menu
Publicações

Publicações por Paulo Vicente Marques

2013

Strong Birefringence Tuning of Optical Waveguides With Femtosecond Laser Irradiation of Bulk Fused Silica and Single Mode Fibers

Autores
Fernandes, LA; Grenier, JR; Marques, PVS; Aitchison, JS; Herman, PR;

Publicação
JOURNAL OF LIGHTWAVE TECHNOLOGY

Abstract
Birefringence tunability is demonstrated in waveguides formed in bulk fused silica and in the core of single mode fibers, by femtosecond laser writing of stress inducing tracks that are placed with different geometries around the core of the waveguides. The femtosecond laser generated stress effect was probed by the birefringence induced spectral splitting of either Bragg grating waveguides in bulk fused silica or weakly modulated, femtosecond laser induced Bragg gratings in optical fibers. Birefringence values as low as 4 x 10(-6) and up to 2 x 10(-3) were obtained by controlling the fabrication conditions such as the laser pulse energy, the writing femtosecond laser polarization, the number of overwriting exposures, and the geometry of the induced stress tracks. Wave retarders are developed and characterized by a cross polarization technique to provide the spectral response of the stress induced birefringence, offering the convenient fabrication of short length and broadband in-line polarization devices. With this approach, millimeter length tracks provided 10 nm bandwidth polarization retarders in a single mode fiber and a 65 nm bandwidth retarders in bulk fused silica.

2013

Fabrication of tailored Bragg gratings by the phase mask dithering/moving technique

Autores
Melo, M; Marques, PVS;

Publicação
Photonic Sensors

Abstract
The most relevant aspects related to the phase mask dithering/moving method for the fabrication of complex Bragg grating designs are reviewed. Details for experimental implementation of this technique is presented, including theoretical analysis of the calibration functions for the correct dither/displacement. Results from tailored Bragg grating structures fabricated by this method are shown. Apodized Bragg gratings with modeled spatial profiles were implemented, resulting in side mode suppression levels of more than 20 dB in gratings showing transmission filtering level higher than 30 dB. Chirped gratings with the spectral bandwidth up to 4 nm, p-shift and sampled Bragg gratings with equalized peaks equally spaced by 0.8 nm (100 GHz) were also fabricated. © 2012 The Author(s).

2018

Fabrication of Monolithic Add-Drop Filters in Pure Silica by Femtosecond Laser Writing

Autores
Marques, PVS; Amorim, VA; Maia, JM; Alexandre, D; Viveiros, D;

Publicação
2018 20TH ANNIVERSARY INTERNATIONAL CONFERENCE ON TRANSPARENT OPTICAL NETWORKS (ICTON)

Abstract
This paper will review the fabrication of monolithic integrated optical devices by laser direct writing with femtosecond pulsed laser sources, starting with the description of experimental procedures and optimal conditions to fabricate low loss optical waveguides, directional couplers, Y-junctions and first order Bragg gratings by point-by-point writing methods. Finally, the characterization results of a fully operational Add-Drop filter in pure fused silica substrate are described.

2019

Loss Mechanisms of Optical Waveguides Inscribed in Fused Silica by Femtosecond Laser Direct Writing

Autores
Amorim, VA; Maia, JM; Viveiros, D; Marques, PVS;

Publicação
JOURNAL OF LIGHTWAVE TECHNOLOGY

Abstract
Optical waveguides directly written in fused silica using a femtosecond laser were characterized from 350 to 1750 nm to gain insight on the waveguide's loss mechanisms and their dependence on processing parameters, such as pulse energy, scan velocity, and annealing temperature. Two major loss mechanisms were identified. In the range of parameters tested, high pulse energy was seen to improve coupling losses at long wavelengths, while high scan velocity has a negative effect in both Rayleigh scattering and coupling losses at long wavelengths. Thermal annealing of the waveguides demonstrated an improvement of the Rayleigh scattering at a cost of higher coupling losses at long wavelengths. Wavelength independent Mie scattering was also observed, evolving negatively with pulse energy. A minimum Rayleigh scattering coefficient of approximate to 0.5 dB.cm(-1).mu m(4) (approximate to 0.08 dB.cm(-1).mu m(4) for thermally treated waveguides) together with a Mie scattering coefficient of approximate to 0.2-0.65 dB/cm are reported.

2019

High Performance Titanium Oxide Coated D-Shaped Optical Fiber Plasmonic Sensor

Autores
Gangwar, RK; Amorim, VA; Marques, PVS;

Publicação
IEEE SENSORS JOURNAL

Abstract
A highly sensitive D-shaped optical fiber refractive index sensor based on surface plasmon resonance is designed and analyzed by using numerical simulations based on the finite element method. The flat surface of the fiber is coated with a gold layer that works as the plasmon active metal, followed by a titanium oxide (TiO2) layer, which is employed to enhance the performance of the sensor. The results demonstrate that the proposed sensor's properties highly depend on the metal and dielectric coating's thickness, enabling the tuning of the resonance wavelength. By supposing the system noise to be 0.1 nm, the theoretical maximum sensitivity was found to be 30000 nm/RIU, with a resolution of 3.33x10(-6) RIU and a figure of merit (FOM) of 312.46 RIU-1, for an analyte with a refractive index of 1.41. The sensor's sensitivity and FOM is improved upon the state of the art, possibly opening new windows of study in the fields of biological and chemical sensing.

2019

Advances in Fs-Laser Micromachining Towards the Development of Optofluidic Devices

Autores
Maia, JM; Amorim, VA; Alexandre, D; Marques, PVS;

Publicação
OPTICS, PHOTONICS AND LASER TECHNOLOGY 2017

Abstract
In this chapter the developments made in femtosecond laser micromachining for applications in the fields of optofluidics and lab-on-a-chip devices are reviewed. This technology can be applied to a wide range of materials (glasses, crystals, polymers) and relies on a non-linear absorption process that leads to a permanent alteration of the material structure. This modification can induce, for instance, a smooth variation of the refractive index or generate etching selectivity, which can be used to form integrated optical circuits and microfluidic systems, respectively. Unlike conventional techniques, fs-laser micromachining offers a way to produce high-resolution three-dimensional components and integrate them in a monolithic approach. Recent advances made in two-photon polymerization have also enabled combination of polymeric structures with microfluidic channels, which can provide additional functionalities, such as fluid transport control. In particular, here it is emphasised the integration ofmicrofluidic systems with optical layers and polymeric structures for the fabrication of miniaturized hybrid devices for chemical synthesis and biosensing.

  • 3
  • 24