Cookies
O website necessita de alguns cookies e outros recursos semelhantes para funcionar. Caso o permita, o INESC TEC irá utilizar cookies para recolher dados sobre as suas visitas, contribuindo, assim, para estatísticas agregadas que permitem melhorar o nosso serviço. Ver mais
Aceitar Rejeitar
  • Menu
Publicações

Publicações por Luís Carlos Santos

2021

Potential Non-Invasive Technique for Accessing Plant Water Contents Using a Radar System

Autores
Santos, LC; dos Santos, FN; Morais, R; Duarte, C;

Publicação
AGRONOMY-BASEL

Abstract
Sap flow measurements of trees are today the most common method to determine evapotranspiration at the tree and the forest/crop canopy level. They provide independent measurements for flux comparisons and model validation. The most common approach to measure the sap flow is based on intrusive solutions with heaters and thermal sensors. This sap flow sensor technology is not very reliable for more than one season crop; it is intrusive and not adequate for low diameter trunk trees. The non-invasive methods comprise mostly Radio-frequency (RF) technologies, typically using satellite or air-born sources. This system can monitor large fields but cannot measure sap levels of a single plant (precision agriculture). This article studies the hypothesis to use of RF signals attenuation principle to detect variations in the quantity of water present in a single plant. This article presents a well-defined experience to measure water content in leaves, by means of high gains RF antennas, spectrometer, and a robotic arm. Moreover, a similar concept is studied with an off-the-shelf radar solution-for the automotive industry-to detect changes in the water presence in a single plant and leaf. The conclusions indicate a novel potential application of this technology to precision agriculture as the experiments data is directly related to the sap flow variations in plant.

2021

A Review of Pruning and Harvesting Manipulators

Autores
Tinoco, V; Silva, MF; Santos, FN; Rocha, LF; Magalhaes, S; Santos, LC;

Publicação
2021 IEEE INTERNATIONAL CONFERENCE ON AUTONOMOUS ROBOT SYSTEMS AND COMPETITIONS (ICARSC)

Abstract
The increase of the world population and a decrease in agricultural labour availability have motivated research robotics in the agricultural field. This paper aims to analyze the state of the art related to manipulators used in the agricultural robotics field. Two pruning and seven harvesting manipulators were reviewed and are analyzed. The pruning manipulators were used in two different scenarios: (i) grapevines and (ii) apple trees. These manipulators showed that a light-controlled environment could reduce visual errors and that prismatic joints on the manipulator are advantageous to obtain a higher reach. The harvesting manipulators were used for 5 different products: (i) strawberries, (ii) tomatoes, (iii) apples, (iv) sweet-peppers and (v) iceberg lettuce. The harvesting manipulators showed that a different kinematic configuration is required for different end-effectors, as some end-effectors only require horizontal movements and others require more degrees of freedom to reach and grasp the target. This work will support new developments of novel solutions related to agricultural robotic grasping and manipulation.

2021

Cost-Effective 4DoF Manipulator for General Applications

Autores
Magalhães, SA; Moreira, AP; dos Santos, FN; Dias, J; Santos, L;

Publicação
Intelligent Systems and Applications - Proceedings of the 2021 Intelligent Systems Conference, IntelliSys 2021, Amsterdam, The Netherlands, 2-3 September, 2021, Volume 3

Abstract
Nowadays, robotic manipulators’ uses are broader than industrial needs. They are applied to perform agricultural tasks, consumer services, medical surgeries, among others. The development of new cost-effective robotic arms assumes a prominent position to enable their wide-spread adoption in these application areas. Bearing these ideas in mind, the objective of this paper is twofold. First, introduce the hardware and software architecture and position-control design for a four Degree of Freedom (DoF) manipulator constituted by high-resolution stepper motors and incremental encoders and a cost-effective price. Secondly, to describe the mitigation strategies adopted to lead with the manipulator’s position using incremental encoders during startup and operating modes. The described solution has a maximum circular workspace of 0.7 m and a maximum payload of 3 kg. The developed architecture was tested, inducing the manipulator to perform a square path. Tests prove an accumulative error of 12.4 mm. All the developed code for firmware and ROS drivers was made publicly available. © 2022, The Author(s), under exclusive license to Springer Nature Switzerland AG.

2021

A Case Study on Improving the Software Dependability of a ROS Path Planner for Steep Slope Vineyards

Autores
Santos, LC; Santos, A; Santos, FN; Valente, A;

Publicação
ROBOTICS

Abstract
Software for robotic systems is becoming progressively more complex despite the existence of established software ecosystems like ROS, as the problems we delegate to robots become more and more challenging. Ensuring that the software works as intended is a crucial (but not trivial) task, although proper quality assurance processes are rarely seen in the open-source robotics community. This paper explains how we analyzed and improved a specialized path planner for steep-slope vineyards regarding its software dependability. The analysis revealed previously unknown bugs in the system, with a relatively low property specification effort. We argue that the benefits of similar quality assurance processes far outweigh the costs and should be more widespread in the robotics domain.

2022

Collision Avoidance Considering Iterative Bezier Based Approach for Steep Slope Terrains

Autores
Santos, LC; Santos, FN; Valente, A; Sobreira, H; Sarmento, J; Petry, M;

Publicação
IEEE ACCESS

Abstract
The Agri-Food production requirements needs a more efficient and autonomous processes, and robotics will play a significant role in this process. Deploying agricultural robots on the farm is still a challenging task. Particularly in slope terrains, where it is crucial to avoid obstacles and dangerous steep slope zones. Path planning solutions may fail under several circumstances, as the appearance of a new obstacle. This work proposes a novel open-source solution called AgRobPP-CA to autonomously perform obstacle avoidance during robot navigation. AgRobPP-CA works in real-time for local obstacle avoidance, allowing small deviations, avoiding unexpected obstacles or dangerous steep slope zones, which could impose a fall of the robot. Our results demonstrated that AgRobPP-CA is capable of avoiding obstacles and high slopes in different vineyard scenarios, with low computation requirements. For example, in the last trial, AgRobPP-CA avoided a steep ramp that could impose a fall to the robot.

2022

Path Planning with Hybrid Maps for processing and memory usage optimisation

Autores
Santos, LC; Santos, FN; Aguiar, AS; Valente, A; Costa, P;

Publicação
2022 IEEE INTERNATIONAL CONFERENCE ON AUTONOMOUS ROBOT SYSTEMS AND COMPETITIONS (ICARSC)

Abstract
Robotics will play an essential role in agriculture. Deploying agricultural robots on the farm is still a challenging task due to the terrain's irregularity and size. Optimal path planning solutions may fail in larger terrains due to memory requirements as the search space increases. This work presents a novel open-source solution called AgRob Topologic Path Planner, which is capable of performing path planning operations using a hybrid map with topological and metric representations. A local A* algorithm pre-plans and saves local paths in local metric maps, saving them into the topological structure. Then, a graph-based A* performs a global search in the topological map, using the saved local paths to provide the full trajectory. Our results demonstrate that this solution could handle large maps (5 hectares) using just 0.002 % of the search space required by a previous solution.

  • 4
  • 5