Abstract
This paper presents an approach for the detection and delineation of the interfaces at the near and far walls of carotid artery using B-mode ultrasound images. After the delineation the system measures automatically the carotid intima-media thickness (IMT) in order to aid the diagnosis of the atherosclerosis. In this method we start by the measurement, at a pixel level, of local features followed by the selection of the most discriminant ones. The next stage is a classification step which assigns a probability to the pixels to belong to an interface, enabling the detection of the carotid artery interfaces. The final artery boundaries are delineated using a dynamic programming approach. The final measurements of IMT produced by the automatic method proposed in this paper were compared with three manual tracings of experts. It was also compared with an automatic method previously developed. The results show that the two automatic detection methods have similar performance, although with slight improvements in the new method, particularly for the the far wall interface.

Abstract
Estimation of strain in tendons for tendinopathy assessment is a hot topic within the sports medicine community. It is believed that, if accurately estimated, existing treatment and rehabilitation protocols can be improved and presymptomatic abnormalities can be detected earlier. State-of-the-art studies present inaccurate and highly variable strain estimates, leaving this problem without solution. Out-of-plane motion, present when acquiring two-dimensional (2D) ultrasound (US) images, is a known problem and may be responsible for such errors. This work investigates the benefit of high-frequency, three-dimensional (3D) US imaging to reduce errors in tendon strain estimation. Volumetric US images were acquired in silico, in vitro, and ex vivo using an innovative acquisition approach that combines the acquisition of 2D high-frequency US images with a mechanical guided system. An affine image registration method was used to estimate global strain. 3D strain estimates were then compared with ground-truth values and with 2D strain estimates. The obtained results for in silico data showed a mean absolute error (MAE) of 0.07%, 0.05%, and 0.27% for 3D estimates along axial, lateral direction, and elevation direction and a respective MAE of 0.21% and 0.29% for 2D strain estimates. Although 3D could outperform 2D, this does not occur in in vitro and ex vivo settings, likely due to 3D acquisition artifacts. Comparison against the state-of-the-art methods showed competitive results. The proposed work shows that 3D strain estimates are more accurate than 2D estimates but acquisition of appropriate 3D US images remains a challenge.

Abstract
The Achilles tendon has a unique structure-function relationship thanks to its innate hierarchical architecture in combination with the rotational anatomy of the sub-tendons from the triceps surae muscles. Previous research has provided valuable insight in global Achilles tendon mechanics, but limitations with the technique used remain. Furthermore, given the global approach evaluating muscle-tendon junction to insertion, regional differences in tendon mechanical properties might be overlooked. However, recent advancements in the field of ultrasound imaging in combination with speckle tracking have made an intratendinous evaluation possible. This study uses high-frequency ultrasound to allow for quantification of regional tendon deformation. Also, an interactive application was developed to improve clinical applicability. A dynamic ultrasound of both Achilles tendons of ten asymptomatic subjects was taken. The displacement and regional strain in the superficial, middle and deep layer were evaluated during passive elongation and isometric contraction. Building on previous research, results showed that the Achilles tendon displaces non-uniformly with a higher displacement found in the deep layer of the tendon. Adding to this, a non-uniform regional strain behavior was found in the Achilles tendon during passive elongation, with the highest strain in the superficial layer. Further exploration of tendon mechanics will improve the knowledge on etiology of tendinopathy and provide options to optimize existing therapeutic loading programs.

Abstract

Abstract
A new approach for robust edge detection on B-mode ultrasound images of the carotid artery is proposed in this paper. The proposed method uses anisotropic Gaussian derivative filters along with non-maximum suppression over the overall artery wall orientation in local regionS. The anisotropic filters allow using a wider integration scale along the edges while preserving the edge location precision. They also perform edge continuation, resulting in the connection of isolated edge points along linear segments, which is a valuable feature for the segmentation of the artery wall layerS. However, this usually results in false edges being detected near convex contours and isolated pointS. The use of non-maximum suppression over pooled local orientations is proposed to solve this issue. Experimental results are provided to demonstrate that the proposed edge detector outperforms other common methods in the detection of the lumen-intima and media-adventia layer interfaces of the carotid vessel wallS. Additionally, the resulting edges are more continuous and precisely located. © 2018 The Author(s).

Abstract