Cookies
O website necessita de alguns cookies e outros recursos semelhantes para funcionar. Caso o permita, o INESC TEC irá utilizar cookies para recolher dados sobre as suas visitas, contribuindo, assim, para estatísticas agregadas que permitem melhorar o nosso serviço. Ver mais
Aceitar Rejeitar
  • Menu
Publicações

Publicações por Alexandre Amaral Oliveira

2017

Collision Avoidance for Safe Structure Inspection with Multirotor UAV

Autores
Azevedo, F; Oliveira, A; Dias, A; Almeida, J; Moreira, M; Santos, T; Ferreira, A; Martins, A; Silva, E;

Publicação
2017 EUROPEAN CONFERENCE ON MOBILE ROBOTS (ECMR)

Abstract
The multirotor UAVs are being integrated into a wide range of application scenarios due to maneuverability in 3D, versatility and reasonable payload of sensors. One of the application scenarios is the inspection of structures where the human intervention is difficult or unsafe and the UAV can provide an improvement of the collected data. At the same time introduce challenges due to low altitude missions and also the fact of being manually operated without line of sight. In order to overcome these issues, this paper presents a LiDAR-based realtime collision avoidance algorithm, denoted by Escape Elliptical Search Point with the ability to be integrated into autonomous and manned modes of operation. The algorithm was validated in a simulation environment developed in Gazebo and also in a mixed environment composed by a real robot in an outdoor scenario and simulated obstacle and LiDAR.

2019

LiDAR-Based Real-Time Detection and Modeling of Power Lines for Unmanned Aerial Vehicles

Autores
Azevedo, F; Dias, A; Almeida, J; Oliveira, A; Ferreira, A; Santos, T; Martins, A; Silva, E;

Publicação
SENSORS

Abstract
The effective monitoring and maintenance of power lines are becoming increasingly important due to a global growing dependence on electricity. The costs and risks associated with the traditional foot patrol and helicopter-based inspections can be reduced by using UAVs with the appropriate sensors. However, this implies developing algorithms to make the power line inspection process reliable and autonomous. In order to overcome the limitations of visual methods in the presence of poor light and noisy backgrounds, we propose to address the problem of power line detection and modeling based on LiDAR. The PL2DM, Power Line LiDAR-based Detection and Modeling, is a novel approach to detect power lines. Its basis is a scan-by-scan adaptive neighbor minimalist comparison for all the points in a point cloud. The power line final model is obtained by matching and grouping several line segments, using their collinearity properties. Horizontally, the power lines are modeled as a straight line, and vertically as a catenary curve. Using a real dataset, the algorithm showed promising results both in terms of outputs and processing time, adding real-time object-based perception capabilities for other layers of processing.

2019

Real-Time LiDAR-based Power Lines Detection for Unmanned Aerial Vehicles

Autores
Azevedo, F; Dias, A; Almeida, J; Oliveira, A; Ferreira, A; Santos, T; Martins, A; Silva, E;

Publicação
2019 19TH IEEE INTERNATIONAL CONFERENCE ON AUTONOMOUS ROBOT SYSTEMS AND COMPETITIONS (ICARSC 2019)

Abstract
The growing dependence of modern-day societies on electricity increases the importance of effective monitoring and maintenance of power lines. Endowing UAVs with the appropriate sensors for inspecting power lines, the costs and risks associated with the traditional foot patrol and helicopter-based inspections can be reduced. However, this implies the development of algorithms to make the inspection process reliable and autonomous. Visual methods are usually applied to locate the power lines and their components, but poor light conditions or a background rich in edges may compromise their results. To overcome those limitations, we propose to address the problem of power line detection and modeling based on LiDAR. A novel approach to the power line detection was developed, the PL2DM -Power Line LiDAR-based Detection and Modeling. It is based in a scan-by-scan adaptive neighbor minimalist comparison for all the points in a point cloud. The power line final model is obtained by matching and grouping several line segments, using their collinearity properties. Horizontally, the power lines are modeled as a straight line, and vertically as a catenary curve. The algorithm was validated with a real dataset, showing promising results both in terms of outputs and processing time, adding real-time object-based perception capabilities for other layers of processing.

2021

Hyperspectral Imaging System for Marine Litter Detection

Autores
Freitas, S; Silva, H; Almeida, C; Viegas, D; Amaral, A; Santos, T; Dias, A; Jorge, PAS; Pham, CK; Moutinho, J; Silva, E;

Publicação
OCEANS 2021: SAN DIEGO - PORTO

Abstract
This work addresses the use of hyperspectral imaging systems for remote detection of marine litter concentrations in oceanic environments. The work consisted on mounting an off-the-shelf hyperspectral imaging system (400-2500 nm) in two aerial platforms: manned and unmanned, and performing data acquisition to develop AI methods capable of detecting marine litter concentrations at the water surface. We performed the campaigns at Porto Pim Bay, Fail Island, Azores, resorting to artificial targets built using marine litter samples. During this work, we also developed a Convolutional Neural Network (CNN-3D), using spatial and spectral information to evaluate deep learning methods to detect marine litter in an automated manner. Results show over 84% overall accuracy (OA) in the detection and classification of the different types of marine litter samples present in the artificial targets.

2022

Unmanned Aerial Vehicle for Wind-Turbine Inspection. Next Step: Offshore

Autores
Dias, A; Almeida, J; Oliveira, A; Santos, T; Martins, A; Silva, E;

Publicação
2022 OCEANS HAMPTON ROADS

Abstract
Offshore wind turbine application has been widespread in the last years, with an estimation that in 2030 will reach a total capacity of 234GW. Offshore wind farms introduce advantages in terms of environmental impact (noise, impact on birds, disrupted landscapes) and energy production (34% onshore and 43% offshore). Still, they also introduce scientific challenges in developing methodologies that allow wind farm inspection (preventive maintenance) safety for humans. This paper presents a UAV approach for autonomous inspection of inland windturbine and describes the field tests in Penela, Portugal. From the state-of-the-art available wind turbine inspection, in 2015, we carried out the first autonomous inspection with a UAV. The inspection of wind blades offshore is an ongoing project; therefore, the paper also presents the preliminary results with a simulation environment to validate the 3D LiDAR and the inspection procedure with new challenges effects: floating platform, wind gusts, and unknown initial blade position.

2017

Collision avoidance for safe structure inspection with multirotor UAV

Autores
Azevedo, F; Oliveira, AA; Dias, A; Almeida, J; Moreira, M; Santos, T; Ferreira, A; Martins, A; da Silva, EP;

Publicação
2017 European Conference on Mobile Robots, ECMR 2017, Paris, France, September 6-8, 2017

Abstract

  • 1
  • 2