Cookies
O website necessita de alguns cookies e outros recursos semelhantes para funcionar. Caso o permita, o INESC TEC irá utilizar cookies para recolher dados sobre as suas visitas, contribuindo, assim, para estatísticas agregadas que permitem melhorar o nosso serviço. Ver mais
Aceitar Rejeitar
  • Menu
Publicações

Publicações por José Sarsfield Cabral

2014

A multidisciplinary framework to support the design of injection mold tools

Autores
Ferreira, I; Cabral, JA; Saraiva, P; Oliveira, MC;

Publicação
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION

Abstract
The design of injection mold tools is a complex process for which market pressures demand ever-shorter development time and higher quality level. Thus, it is considered imperative to adopt new methods and tools to support the design process, in order to achieve a more effective mold design solution. Based on this assumption, a multidisciplinary framework was developed, centered on Design for Six Sigma methodology and reinforced with a set of highly valued techniques, namely: the European Customer Satisfaction, the Axiomatic Design and the Multidisciplinary Design Optimization. As a result, a platform was built to support the design of any mold tool without undercuts, which tackles the design of an injection mold as a fully integrated multidisciplinary optimization problem, oriented by customer preferences and their impositions. A set of specific analysis sub-modules is integrated through an overseeing optimization code system, responsible for the numerical simulation of the injection process. This platform was validated through the comparison with an existing mold, whose results attained highlight the great potential of the proposed framework to achieve mold design improvement. In particular, the value of mold solutions generated led to a global improvement on mold performance by 5 %.

2019

QUALITY ASSURANCE OF DOCTORAL EDUCATION IN PORTUGAL: A RETROSPECTIVE OF THE FIRST ACCREDITATION CYCLE

Autores
Migueis, V; Cardoso, S; Rosa, MJ; Cabral, JS;

Publicação
EDULEARN19: 11TH INTERNATIONAL CONFERENCE ON EDUCATION AND NEW LEARNING TECHNOLOGIES

Abstract
In the last decades, the assurance of doctoral education's quality and their respective external quality assurance (QA) systems have been on the agenda of many European countries. Portugal is no exception, with doctoral education being envisaged by the national study programmes' accreditation system. This study aims to discuss both the forms assumed by the QA of doctoral education within the scope of a tightly regulated system, such as the Portuguese one, as well as the effects or impact of such a system in this education level. In trying to explore this impact, particular attention is given to the accreditation results (full accreditation, conditional accreditation and non-accreditation) of the doctoral programmes according to their scientific area and higher education sector (public and private). Overall it is possible to conclude that the Portuguese QA system has been contributing to the reorganisation of doctoral education, both by excluding programmes that do not meet a set of minimum quality criteria and by promoting the enhancement of the remaining programmes, through the enforcement of improvement measures. This reorganisation seems to differently affect doctoral programmes from distinct scientific areas as well as from private and public institutions.

2020

The Impact of Logistics Performance on Argentina, Brazil, and the US Soybean Exports from 2012 to 2018: A Gravity Model Approach

Autores
Mendes dos Reis, JGM; Amorim, PS; Sarsfield Pereira Cabral, JASP; Toloi, RC;

Publicação
AGRICULTURE-BASEL

Abstract
Soybean is one of the main sources of protein directly and indirectly in human nutrition, and it is highly dependent on logistics to connect country growers and international markets. Although recent studies deal with the impact of logistics on international trade, this impact in agricultural commodities is still an open research question. Moreover, these studies usually do not consider the influence of all components of the logistics on trade. This paper, therefore, aims at identifying the role of logistics performance in soybean exports among Argentina, Brazil, the US and their trading partners from 2012 to 2018. Using an extended gravity model, we examine whether the indicators of the World Bank Logistics Performance Index (LPI), adopted as a proxy of logistics efficiency, are an important determinant of bilateral soybean trade facilitation. The results lead to the conclusion that it is necessary to analyze the LPI throughout its indicators because they may affect trade differently. The novelty of this article is to provide an analysis of the impact of different logistics aspects on commodity trade, more specifically in the soybean case. Finally, regarding the model results, logistics infrastructure has a positive and significant correlation with soybean trade as supposed in most of the literature.

2021

An integrated quantitative framework for supporting product design in the mold sector

Autores
Ferreira, I; Cabral, JA; Saraiva, P;

Publicação
Injection Molding: Process, Design, and Applications

Abstract
The injection mold is a high precision tool responsible for the production of most plastic parts used everywhere. Its design is considered critically important for the quality of the product and efficient processing, as well as determinant for the economics of the entire injection molding process. However, typically, no formal engineering analysis is carried out during the mold design stage. In fact, traditionally, designers rely on their skills and intuition, following a set of general guidelines. This does not ensure that the final mold design is acceptable or the best option. At the same time, mold makers are now highly pressured to shorten both leading times and cost, as well as to accomplish higher levels of mold performance. For these reasons, it is imperative to adopt new methods and tools that allow for faster and higher integrated mold design. To that end, a new global approach, based on the integration of well-known quantitative techniques, such as Design for Six Sigma (DFSS), Structural Equation Modeling (SEM), Axiomatic Design (AD) and Multidisciplinary Design Optimization (MDO) is presented. Although some of these methods have been largely explored, individually or in combination with other methodologies, a quantitative integration of all aspects of design, in such a way that the whole process becomes logical and comprehensible, has not yet been considered. To that end, the DFSS methodology, through its IDOV roadmap, was adopted. It is based on the ICOV Yang and El-Haik proposal, establishing four stages for the design process: Identify, which aims to define customers’ requirements/expectations; Design, where the creation of a product concept, and its system-level design, is performed; Optimization, in which all the detailed design, through product optimization, is handled; and finally, Validation, where all product design decisions are validated, in order to verify if the new designed entity indeed meets customer and other requirements. As a result, this approach tackles the design of an injection mold in a global and quantitative approach, starting with a full understanding of customer requirements and converting them into optimal mold solutions. In order to validate it, an integrated platform was developed, where all different analysis modules were inserted and optimized through an overseeing code system. The results attained highlight the great potential of the proposed framework to achieve mold design improvements, with consequent reduction of rework and time savings for the entire mold design process. © 2011 by Nova Science Publishers, Inc.

2022

Applying analytic hierarchy process (AHP) to identify decision-making in soybean supply chains: a case of Mato Grosso production [Aplicando o processo de hierarquia analítica (AHP) para identificar a tomada de decisão na cadeia de suprimentos da soja: um estudo de caso da produção em Mato Grosso]

Autores
Toloi, RC; Reis, JGMD; Toloi, MNV; Vendrametto, O; Cabral, JASP;

Publicação
Revista de Economia e Sociologia Rural

Abstract
This paper aims to identify and analyze the factors that influence the decision of Mato Grosso’s farmers to produce soybean using the Analytic Hierarchy Process (AHP). We found evidence that decisionmaking of soybean production is related to rural production aspects such as climate, financing, cost of inputs, and soil quality rather than marketing and logistics. The novelty of this paper is the empirical analysis of the decision-making in agricultural production using AHP. The decision model was created and tested considering 21 farmers and 19 experts linked to the soybean production. Three different scenarios were considered: farmers’ view, experts’ view, and combined view. Our findings indicate that farmers and experts agree with rural aspects are predominant in the decision to plant soybean. Moreover, logistics have been used as an important flag of soybean competitiveness on international trade by soybean stakeholders in Brazil. However, our results show that logistics impact in the soybean decision-making process is low. Due to data limitation access, this study focuses only on Mato Grosso. However, this study has an exploratory character and presents empirical results that may help to understand soybean production over the country.

2011

An integrated quantitative framework for supporting product design in the mold sector

Autores
Ferreira, I; Cabral, JA; Saraiva, P;

Publicação
Injection Molding: Process, Design, and Applications

Abstract
The injection mold is a high precision tool responsible for the production of most plastic parts used everywhere. Its design is considered critically important for the quality of the product and efficient processing, as well as determinant for the economics of the entire injection molding process. However, typically, no formal engineering analysis is carried out during the mold design stage. In fact, traditionally, designers rely on their skills and intuition, following a set of general guidelines. This does not ensure that the final mold design is acceptable or the best option. At the same time, mold makers are now highly pressured to shorten both leading times and cost, as well as to accomplish higher levels of mold performance. For these reasons, it is imperative to adopt new methods and tools that allow for faster and higher integrated mold design. To that end, a new global approach, based on the integration of well-known quantitative techniques, such as Design for Six Sigma (DFSS), Structural Equation Modeling (SEM), Axiomatic Design (AD) and Multidisciplinary Design Optimization (MDO) is presented. Although some of these methods have been largely explored, individually or in combination with other methodologies, a quantitative integration of all aspects of design, in such a way that the whole process becomes logical and comprehensible, has not yet been considered. To that end, the DFSS methodology, through its IDOV roadmap, was adopted. It is based on the ICOV Yang and El-Haik proposal, establishing four stages for the design process: Identify, which aims to define customers' requirements/expectations; Design, where the creation of a product concept, and its system-level design, is performed; Optimization, in which all the detailed design, through product optimization, is handled; and finally, Validation, where all product design decisions are validated, in order to verify if the new designed entity indeed meets customer and other requirements. As a result, this approach tackles the design of an injection mold in a global and quantitative approach, starting with a full understanding of customer requirements and converting them into optimal mold solutions. In order to validate it, an integrated platform was developed, where all different analysis modules were inserted and optimized through an overseeing code system. The results attained highlight the great potential of the proposed framework to achieve mold design improvements, with consequent reduction of rework and time savings for the entire mold design process.

  • 2
  • 5