Abstract
Posicast feedback control systems are very sensitive to model uncertainty. This paper proposes the use of Particle Swarm Optimization (PSO) to auto-tune two-degrees of freedom control systems. The system considers as a pre-filter a half-cycle Posicast command shaper and a PID controller in the feedback loop. A model reference technique is proposed to track differences among model and system to be controlled, feeding a decision block which will trigger an auto-tuning optimization mechanism. Preliminary simulation results are presented showing the proposed technique effectiveness to deal with prescribed plant uncertainties.

Abstract
The particle swarm optimization (PSO), one of the most successful natural inspired algorithms, is revisited in the context of a proposal for a new teaching experiment. The problem considered is the open-loop step identification procedure, which is studied as an optimization problem. The PSO canonical algorithm main issues addressed within the proposed open-loop step identification experience are: the swarm random initialization methodology, the population size variation, and the inertia weight selection. The teaching experience learning outcomes are stated, simulation results presented, and feedback results from students analyzed. (c) 2011 Wiley Periodicals, Inc. Comput Appl Eng Educ 22:227-237, 2014; View this article online at ; DOI

Abstract
The use of rigid robot manipulators with good performance in industrial applications demands a proper robust and optimized control technique. Several works have proven the efficient use of metaheuristics optimization algorithms to work with complex problems in the robotic area. In this work, it is proposed the use of Grey Wolf Optimizer (GWO) with chaotic basis to optimize the parameters of a robust Higher Order Sliding Modes (HOSM) controller for the position control in joint space of a rigid robot manipulator. A total of seven test cases were considered varying the chosen chaotic map, face to the original GWO and the general repeatability of such algorithm is improved using chaotic versions. Also, two cost functions were tested within the HOSM optimization. Simulation results suggest that both algorithm and cost function formulations influence the chaotic map choice. In fact, the chattering problem, presented by HOSM controllers, is reduced when the cost function attempts to minimize the total variation of the control signal.

Abstract
Water level regulation of irrigation canals represents a major challenge for control systems design. Those systems exhibit large dynamic variations in their operating conditions. To overcome this fact, robust controllers should be applied. The sliding mode control paradigm reveals this ability which make it a suitable candidate to be incorporated in the irrigation canal control loop. Moreover, its flexibility can be further potentiated by extending the ordinary formulation by adding fractional-order integro-differential operations. In this work, fractional-order sliding mode control is applied to the above mentioned problem. This application represents a novelty and, according to the obtained simulation results, leads to an accurate and proper performance when compared to its integer-order counterpart and to a fractional proportional-integrative controller, recently proposed for this problem.

Abstract
Renewable sources of energy play a decisive role in the current energetic paradigm to mitigate climate changes associated with greenhouse gases emissions and problems of energy security. Biomass energy and in particular forest wood biomass supply chains have the potential to enhance these changes due to its several benefits such as ability to produce both bioenergy and bioproducts, generate energy on-demand, among others. However, this energy source has some drawbacks mainly associated with the involved costs. In this work, the use of a Model Predictive Control approach is proposed to plan, monitor and control the wood-biomass supply chain for energy production at a tactical level. With this methodology the biomass supply chain becomes more efficient ensuring the service quality in a more competitive way. In order to test and validate the proposed approach different simulation scenarios were considered that proved the efficiency of the proposed tool regarding the decisions definition and control.

Abstract
The diffusion of innovation theory aims to explain how new ideas and practices are disseminated among social system members. A significant number of the existing models is based on the use of parameters which determine the process of innovation adoption, and rely on simple mathematical functions centered in the observation and description of diffusion patterns. These models enable a more explicit diffusion process study, but their use involves the estimation of diffusion coefficients, usually obtained from historical data or chronological series. This raises some application problems in contexts where there is no data or the data is insufficient. This paper proposes the use of evolutionary computation as an alternative approach for the simulation of innovation diffusion within organizations. To overcome some of the problems inherent to existing models an evolutionary algorithm is proposed based on a probabilistic approach. The results of the simulations that were done to validate the algorithm revealed to be very promissing in this context. Simulation experiment results are presented that reveals a very promising approach of the proposed model. © 2013 Springer-Verlag Berlin Heidelberg.