Cookies
O website necessita de alguns cookies e outros recursos semelhantes para funcionar. Caso o permita, o INESC TEC irá utilizar cookies para recolher dados sobre as suas visitas, contribuindo, assim, para estatísticas agregadas que permitem melhorar o nosso serviço. Ver mais
Aceitar Rejeitar
  • Menu
Publicações

Publicações por Rui Diogo Rebelo

2015

Performance of state space and ARIMA models for consumer retail sales forecasting

Autores
Ramos, P; Santos, N; Rebelo, R;

Publicação
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING

Abstract
Forecasting future sales is one of the most important issues that is beyond all strategic and planning decisions in effective operations of retail businesses. For profitable retail businesses, accurate demand forecasting is crucial in organizing and planning production, purchasing, transportation and labor force. Retail sales series belong to a special type of time series that typically contain trend and seasonal patterns, presenting challenges in developing effective forecasting models. This work compares the forecasting performance of state space models and ARIMA models. The forecasting performance is demonstrated through a case study of retail sales of five different categories of women footwear: Boots, Booties, Flats, Sandals and Shoes. On both methodologies the model with the minimum value of Akaike's Information Criteria for the in-sample period was selected from all admissible models for further evaluation in the out-of-sample. Both one-step and multiple-step forecasts were produced. The results show that when an automatic algorithm the overall out-of-sample forecasting performance of state space and ARIMA models evaluated via RMSE, MAE and MAPE is quite similar on both one-step and multi-step forecasts. We also conclude that state space and ARIMA produce coverage probabilities that are close to the nominal rates for both one-step and multi-step forecasts.

2014

A tabu search for the permutation flow shop problem with sequence dependent setup times

Autores
Santos, N; Rebelo, R; Pedroso, JP;

Publicação
IJDATS

Abstract
In this work we present a tabu search metaheuristic method for solving the permutation flow shop scheduling problem with sequence dependent setup times and the objective of minimising total weighted tardiness. The problem is well known for its practical applications and for the difficulty in obtaining good solutions. The tabu search method proposed is based on the insertion neighbourhood, and is characterised by the selection and evaluation of a small subset of this neighbourhood at each iteration; this has consequences both on diversification and intensification of the search. We also propose a speed-up technique based on book keeping information of the current solution, used for the evaluation of its neighbours. © 2014 Inderscience Enterprises Ltd.

2016

Evaluating the Forecasting Accuracy of Pure Time Series Models on Retail Data

Autores
Ramos, P; Oliveira, JM; Rebelo, R;

Publicação
ADVANCES IN MANUFACTURING TECHNOLOGY XXX

Abstract
Forecasting future sales is one of the most important issues that is beyond all strategic and planning decisions in effective operations of retail supply chains. For profitable retail businesses, accurate sales forecasting is crucial in organizing and planning purchasing, production, transportation and labor force. Retail sales series belong to a special type of time series that typically contain strong trend and seasonal patterns, presenting challenges in developing effective forecasting models. This paper compares the forecasting performance of state space models and ARIMA models. The forecasting performance is demonstrated through a case study of retail sales of five different categories of women footwear: Boots, Booties, Flats, Sandals and Shoes. An approach based on cross-validation is used to identify automatically appropriate state space and ARIMA models. The forecasting performance of these models is also compared by examining the out-of-sample forecasts. The results indicate that the overall out-of-sample forecasting performance of ARIMA models evaluated via RMSE, MAE and MAPE is better than state space models. The performance of both forecasting methodologies in producing forecast intervals was also evaluated and the results indicate that ARIMA produces slightly better coverage probabilities than state space models for the nominal 95% forecast intervals. For the nominal 80% forecast intervals the performance of state space models is slightly better.

2017

Balancing a Mixed-Model Assembly System in the Footwear Industry

Autores
Sadeghi, P; Rebelo, RD; Soeiro Ferreira, J;

Publicação
IFIP Advances in Information and Communication Technology

Abstract
Portuguese footwear industry has improved dramatically to become one of the main world players. This work is part of a project in cooperation with a large footwear company, operating a new automated assembly equipment, integrating various lines. Balancing such lines implies going from an almost manual preparation executed by experienced operators, to a planning supported by optimisation systems. These complex mixed-model lines have distinctive characteristics, which make balancing a unique problem. The paper proposes the ASBsm – Assembly System Balancing Solution Method, a new method that integrates a constructive heuristic and an improvement heuristic, which takes inspiration from Tabu Search. The solutions obtained, based on real instances, are quite encouraging when compared with other effected factory solutions. Consequently, the balances obtained by ASBsm are now being implemented and articulated with sequencing methods. © IFIP International Federation for Information Processing 2017.

2018

Balancing mixed-model assembly systems in the footwear industry with a variable neighbourhood descent method

Autores
Sadeghi, P; Rebelo, RD; Ferreira, JS;

Publicação
COMPUTERS & INDUSTRIAL ENGINEERING

Abstract
This paper addresses new Mixed-model Assembly Line Balancing Problems (MALBP) in a real industrial context, the stitching systems of a footwear company. The work is part of large ongoing projects with this industry, and the main purposes are minimising the number of required workstations and smoothing the operators' workload. The company has invested in new flexible automated assembly systems, which accommodate dozens of workstations and many moving boxes. Footwear components are inside boxes (with various quantities) which can move from the warehouses to a convenient workstation or between any workstations (in any order). This is a significant and distinct feature of the MALBP, together with the fact that the assignment of different skilled operators and machines is achieved simultaneously. An optimisation model is developed, in part to facilitate the understanding of the situation and to solve small-size instances. Due to the complexity of the problems, we had to devise an approximate method, based on the Variable Neighbourhood Descent (VND) metaheuristic and integrating an adaptation of the Ranked Positional Weighted (RPW) method. The adapted RPW method is used to create initial feasible solutions, while preassigning special operators and machines. After choosing good initial solutions, VND is applied to improve their quality. The new contributed method, named as RPW-VNDbal, is tested with medium and large instances, in two distinct stitching systems. A Lower Bound of the objective function and Simulation contribute to evaluate the solutions and their practicability. The results implemented by the project team, show that the RPW-VNDbal method is fast enough and offers better solutions than those implemented by the experienced operation managers of the company.

2020

Exploring the Linkages Between the Internet of Things and Planning and Control Systems in Industrial Applications

Autores
Soares, R; Marques, A; Gomes, R; Guardão, L; Hernández, E; Rebelo, R;

Publicação
Lecture Notes in Mechanical Engineering

Abstract
The potential of the Internet of Things (IoT) and other technologies in the realm of Industry 4.0 to generate valuable data for monitoring the performance of the production processes and the whole supply chain is well established. However, these large volumes of data can be used within planning and control systems (PCSs) to enhance real-time planning and decision-making. This paper conducts a literature review to envisage an overall system architecture that combines IoT and PCS for planning, monitoring and control of operations at the level of an industrial production process or at the level of its supply chain. Despite the extensive literature on IoT implementations, few studies explain the interactions between IoT and the components of PCS. It is expected that, with the increasing digitization of business processes, approaches with PCS and IoT become ubiquitous in the near future. © 2020, Springer Nature Switzerland AG.

  • 1
  • 2