Abstract
Multimodal perception systems enhance the robustness and adaptability of autonomous mobile robots by integrating heterogeneous sensor modalities, improving long-term localisation and mapping in dynamic environments and human-robot interaction. Current mobile platforms often focus on specific sensor configurations and prioritise cost-effectiveness, possibly limiting the flexibility of the user to extend the original robots further. This paper presents a methodology to integrate multimodal perception into a ground mobile platform, incorporating wheel odometry, 2D laser scanners, 3D Light Detection and Ranging (LiDAR), and RGBD cameras. The methodology describes the electronics design to power devices, firmware, computation and networking architecture aspects, and mechanical mounting for the sensory system based on 3D printing, laser cutting, and bending metal sheet processes. Experiments demonstrate the usage of the revised platform in 2D and 3D localisation and mapping and pallet pocket estimation applications. All the documentation and designs are accessible in a public repository.

Abstract
Robotics education plays a crucial role in developing STEM skills. However, university-level courses often emphasize theoretical learning, which can lead to decreased student engagement and motivation. In this paper, we tackle the challenge of providing hands-on robotics experience in higher education by adapting a mobile robot originally designed for competitions to be used in laboratory classes. Our approach integrates real-world robot operation into coursework, bridging the gap between simulation and physical implementation while maintaining accessibility. The robot's software is developed using ROS, and its effectiveness is assessed through student surveys. The results indicate that the platform increases student engagement and interest in robotics topics. Furthermore, feedback from teachers is also collected and confirmed that the platform boosts students' confidence and understanding of robotics.

Abstract
This paper presents a novel Nonlinear Model Predictive Controller (NMPC) architecture for trajectory tracking of omnidirectional robots. The key innovation lies in the method of handling constraints on maximum velocity and acceleration outside of the optimization process, significantly reducing computation time. The controller uses a simplified process model to predict the robot’s state evolution, enabling real-time cost function minimization through gradient descent methods. The cost function penalizes position and orientation errors as well as control effort variation. Experimental results compare the performance of the proposed controller with a generic Proportional-Derivative (PD) controller and a NMPC with integrated optimization constraints. The findings reveal that the proposed controller achieves higher precision than the PD controller and similar precision to the NMPC with integrated constraints, but with substantially lower computational effort. © The Author(s), under exclusive license to Springer Nature Switzerland AG 2025.

Abstract
This article presents the development of a tethered fixed-wing tail-sitter VTOL (Vertical Take-Off and Landing) Unmanned Aerial Vehicle system. The design focuses on improving energy efficiency by utilizing the wings to harness wind power, similar to a kite, while maintaining VTOL functionality. A distinguishing feature is the purpose-built autopilot system, with custom hardware and software components specifically engineered for this application. The study presents the system identification process for obtaining five MIMO (Multiple-Input Multiple-Output) transfer functions that characterize the dynamics between roll-yaw commands and responses, including the tether angle feedback. To address the inherent coupling effects and uncertainties in the system, robust mixed sensitivity (H8) MIMO controllers are developed. The controllers were validated through both simulations and experimental flights, demonstrating effective performance in handling cross-coupling effects and maintaining stability under various operating conditions. According to flight test findings, the system can precisely manage the tether angle while adjusting for ground effect disturbances. This allows for accurate tethered navigation, a stable attitude, and the maintenance of an adequate yaw heading. © 2025 IEEE.

Abstract
Quadruped robots have gained significant attention in the robotics world due to their capability to traverse unstructured terrains, making them advantageous in search and rescue and surveillance operations. However, their utility is substantially restricted in situations where object manipulation is necessary. A potential solution is to integrate a robotic arm, although this can be challenging since the arm's addition may unbalance the whole system, affecting the quadruped locomotion. To address this issue, the robotic arm must be adapted to the quadruped robot, which is not viable with commercially available products. This paper details the design and development of a robotic arm that has been specifically built to integrate with a quadruped robot to use in a variety of agricultural and industrial applications. The design of the arm, including its physical model and kinematic configuration, is presented. To assess the effectiveness of the prototype, a simulation was conducted with a motion-planning algorithm based on the arm's inverse kinematics. The simulation results confirm the system's stability and the functionality of the robotic arm's movement.