Abstract
In recent years, as a result of population growth and the strong demand for energy resources, there has been an increase in greenhouse gas emissions. Thus, it is necessary to find solutions to reduce these emissions. This will make the use of electric vehicles (EV) more attractive and reduce the high dependency on internal combustion vehicles. However, the integration of electric vehicles will pose some challenges. For example, it will be necessary to increase the number of fast electric vehicle charging stations (FEVCS) to make electric mobility more attractive. Due to the high power levels involved in these systems, there are voltage drops that affect the voltage profile of some nodes of the distribution networks. This paper presents a methodology based on a genetic algorithm (GA) that is used to find the optimal location of charging stations that cause the minimum impact on the grid voltage profile. Two case studies are considered to evaluate the behavior of the distribution grid with different numbers of EV charging stations connected. From the results obtained, it can be concluded that the GA provides an efficient way to find the best charging station locations, ensuring that the grid voltage profile is within the regulatory limits and that the value of losses is minimized.

Abstract
The development of Artificial Intelligence (AI) models with an accurate prediction of human facial expression has become a significant challenge for the cases in which masks and sunglasses cover critical facial areas. Given that a substantial portion of human interactions involves non-verbal communication, accurately detecting human emotions such as anger, fear, disgust, happiness, sadness, and surprise would benefit a wide range of applications, from security assessments to psychological treatments. As a workaround, the current study explores the performance of a novel multi-channel arrangement comprised of a Haar-wavelet, Histogram of Oriented Gradients (HOG), and grayscale filters to improve the predictions of deep Convolutional Neural Network (CNN) on occluded results. This study uses the FER-2013 dataset and produces occluded samples by applying a virtual mask that covers almost 55% of facial areas comprising the mouth, lips, and jaw locations. Further investigations, including the impact of each filter, utilizing pre-trained models on occluded samples (transfer learning), and comparison to prior models are also carried out. The proposed approach yields an accuracy rate of 71% for non-occluded and 66% for the occluded samples, which are 6% to 11% higher than the base model. Further transfer learning technique increases the accuracy metrics by 18%, indicating that non-occluded pre-trained models can reveal a broader range of features and their relation, which to some extent compensates for the removed features due to the occlusion. These results suggest the potential capabilities of the proposed technique for similar imaging applications.

Abstract
Job shop scheduling problems are common in the engineering field. In spite of some approaches consider just the most important objective to optimize, several other conflicting criteria are also important. Multi-objective optimization algorithms can be used to solve these problems optimizing, simultaneously, two or more objectives. However, when the number of objectives increases, the problems become more challenging. This paper presents the results of the optimization of a set of job shop scheduling with unrelated parallel machines and sequence-dependent setup times, using the NSGA-III. Several instances with different sizes in terms of number of jobs and machines are considered. The goal is to assign jobs to machines in order to simultaneously minimize the maximum job completion time (makespan), the average job completion time and the standard deviation of the job completion time. These results are analysed and confirm the validity and highlight the advantages of this approach.

Abstract
High-frequency (HF) emissions, referred to as supraharmonics (SHs), are proliferating in low- and medium-voltage networks due to the increasing use of technologies that generate distortions in the 2 kHz to 150 kHz range. The propagation of SHs through the electrical grid causes interference with power supply components and end-user equipment. With the increasing frequency of these incidents, it is imperative to establish guidelines and regulations that facilitate diagnosis and limit the amount of emissions injected into the electrical grid. The proliferation of SH emissions from active power electronics devices is a significant concern, especially considering the growing importance of photovoltaic (PV) systems in the context of climate change. The aim of this paper is to address and analyze the emissions from different PV inverters present in an electrical network. Several scenarios were simulated to understanding and identifying possible correlations. This study examines real signals from PV systems, which exhibit narrowband, broadband and time-varying emissions. This paper concludes by emphasizing the need for specific regulations for this frequency range while also providing indications for future research.

Abstract
Self-consumption regulations are leading to the emergence of new business models proposed by new players and causing traditional players to make new proposals to take advantage of the new business opportunities. In this context, traditional retailers are assessing self-consumption business models, offering management services for self-consumption structures, or the installation of distributed resources, such as solar panels or batteries. Some of the new business models being proposed by electricity suppliers are related to virtual battery services. Indeed, suppliers can, in the free retail market, create innovative tariffs, and design them to make their customers believe they own and manage a battery, even if it does not correspond to a physical battery in the grid. This paper analyses the business model of a supplier offering a virtual battery service, comparing it to the installation of a physical battery, showing that it has no significant benefits compared to more simple approaches.

Abstract
Companies are putting more emphasis on the customer experience, associating services with their physical products with the help of emerging technologies. At the same time, several actors participating in research and innovation projects, such as universities, research institutes, and service providers, are involved in the value co-creation process. Thus, this study describes how digitalisation and servitisation in the context of participation in research and innovation projects contributed to innovation in industrial companies’ business model (BM). Qualitative exploratory research took place, collecting data through interviews with twelve key actors in industrial companies. The interviewees were professionals in management and R&D areas and founders from nine European countries who participated in six research and innovation European projects. The exchange of knowledge and experiences between the different actors of the innovation ecosystem influences this. From a practical point of view, research provides managers of industrial companies with the best practices and describes the main changes observed in the BM Canvas. This study also contributes to categorising companies in terms of their service maturity by associating factors other than servitisation, such as digitalisation and the actors of the research and innovation projects. © The Author(s), under exclusive license to Springer Nature Switzerland AG 2024.