Abstract
Liquid Nitrogen is one of the key refrigerating elements in cooling near infrared science instruments to reduce the dark, readout noises and thermal emissions in the near infrared originated from the instrument structure. Usually, a small liquid nitrogen tank connected to the near infrared instrument is auto filled from a large Dewar in order to maintain required low temperatures during the experiment for several hours. The detectors used in these instruments are quite expensive and they need to be cooled down steadily (< 2K/min) to avoid mechanical damage. The steady state cooling of the detector is the key requirement to be considered while cooling down the detector. In this paper, a controller is developed to auto-fill the liquid nitrogen tank and also to keep the refrigeration rate of the detector below 2K/min. A systematic survey of auto-filling controllers is studied. The auto-filling of liquid nitrogen from Dewar to tank is implemented with a standard on-off controller. To address the critical refrigeration rate of the detector, two approaches are studied: a) by fixed time pumping; b) by feedback the detector cooling rate. In this work we have used inexpensive equipment to develop this controller. It is very successfully used for GRAVITY acquisition camera, a near infrared instrument for European Southern Observatory. This controller has been stable and efficient for our experiment. This low cost controller can be used for any student laboratory and research.

Abstract
Precise measurements of the S-stars orbiting SgrA* have set strong constraints on the nature of the compact object at the centre of the Milky Way. The presence of a black hole in that region is well established, but its neighbouring environment is still an open debate. In that respect, the existence of dark matter in that central region may be detectable due to its strong signatures on the orbits of stars: the main effect is a Newtonian precession which will affect the overall pericentre shift of S2, the latter being a target measurement of the GRAVITY instrument. The exact nature of this dark matter (e.g. stellar dark remnants or diffuse dark matter) is unknown. This article assumes it to be a scalar field of toroidal distribution, associated with ultralight dark matter particles, surrounding the Kerr black hole. Such a field is a form of 'hair' expected in the context of superradiance, a mechanism that extracts rotational energy from the black hole. Orbital signatures for the S2 star are computed and shown to be detectable by GRAVITY. The scalar field can be constrained because the variation of orbital elements depends both on the relative mass of the scalar field to the black hole and on the field mass coupling parameter.

Abstract
Context. Z CMa is a complex pre-main sequence binary with a current separation of 110 mas, known to consist of an FU Orionis star (SE component) and an embedded Herbig Be star (NW component). Although it represents a well-studied and characterized system, the origin of photometric variabilities, the component properties, and the physical configuration of the system remain mostly unknown. Aims. Immediately when the late-2008 outburst of Z CMa was announced to the community, we initiated a high angular resolution imaging campaign aimed at characterizing the outburst state of both components of the system in the near-infrared. Methods. We used the VLT/NACO and the Keck/NIRC2 near-infrared adaptive optics instrument to monitor the astrometric position and the near-infrared photometry of the Z CMa components during the outburst phase and one year after. The VLT/SINFONI and Keck/OSIRIS integral field spectroscrographs were in addition used to characterize for the first time the resolved spectral properties of the FU Orionis and the Herbig Be component during and after the outburst. Results. We confirm that the NW star dominates the system flux in the 1.1-3.8 mu m range and is responsible for the photometric outburst. We extract the first medium-resolution (R similar to 2000-4000) near-infrared (1.1-2.4 mu m) spectra of the individual components. The SE component has a spectrum typical of FU Orionis objects. The NW component spectrum is characteristic of embedded outbursting protostars and EX Or objects. It displays numerous emission lines whose intensity correlates with the system activity. In particular, we find a correlation between the Br gamma equivalent width and the system brightness. The bluing of the continuum of the NW component along with the absolute flux and color-variation of the system during the outburst suggests that the outburst was caused by a complex interplay between a variation of the extinction in the line of sight of the NW component on one hand, and the emission of shocked regions close to the NW component on the other. We confirm the recently reported wiggling of the SE component jet from [Fe II] line emission. We find a point-like structure associated with a peak emission at 2.098 mu m coincidental with the clump or arm seen in broadband polarization di ff erential imaging as well as additional di ff use emission along a PA = 214 degrees. The origin of these two structures is unclear and deserves further investigation.

Abstract
During the last two decades, the first generation of beam combiners at the Very Large Telescope Interferometer has proved the importance of optical interferometry for high-angular resolution astrophysical studies in the near- and mid-infrared. With the advent of 4-beam combiners at the VLTI, the u - v coverage per pointing increases significantly, providing an opportunity to use reconstructed images as powerful scientific tools. Therefore, interferometric imaging is already a key feature of the new generation of VLTI instruments, as well as for other interferometric facilities like CHARA and JWST. It is thus imperative to account for the current image reconstruction capabilities and their expected evolutions in the coming years. Here, we present a general overview of the current situation of optical interferometric image reconstruction with a focus on new wavelength-dependent information, highlighting its main advantages and limitations. As an Appendix we include several cookbooks describing the usage and installation of several state-of-the art image reconstruction packages. To illustrate the current capabilities of the software available to the community, we recovered chromatic images, from simulated MATISSE data, using the MCMC software SQUEEZE. With these images, we aim at showing the importance of selecting good regularization functions and their impact on the reconstruction.

Abstract
The broadening of atomic emission lines by high-velocity motion of gas near accreting supermassive black holes is an observational hallmark of quasars(1). Observations of broad emission lines could potentially constrain the mechanism for transporting gas inwards through accretion disks or outwards through winds(2). The size of regions for which broad emission lines are observed (broad-line regions) has been estimated by measuring the delay in light travel time between the variable brightness of the accretion disk continuum and the emission lines(3)-a method known as reverberation mapping. In some models the emission lines arise from a continuous outflow(4), whereas in others they arise from orbiting gas clouds(5). Directly imaging such regions has not hitherto been possible because of their small angular size (less than 10(-4) arcseconds(3,6)). Here we report a spatial offset (with a spatial resolution of 10(-5) arcseconds, or about 0.03 parsecs for a distance of 550 million parsecs) between the red and blue photo-centres of the broad Paschen-alpha line of the quasar 3C 273 perpendicular to the direction of its radio jet. This spatial offset corresponds to a gradient in the velocity of the gas and thus implies that the gas is orbiting the central supermassive black hole. The data are well fitted by a broad-line-region model of a thick disk of gravitationally bound material orbiting a black hole of 3 x 10(8) solar masses. We infer a disk radius of 150 light days; a radius of 100-400 light days was found previously using reverberation mapping(7-9). The rotation axis of the disk aligns in inclination and position angle with the radio jet. Our results support the methods that are often used to estimate the masses of accreting supermassive black holes and to study their evolution over cosmic time.

Abstract
GRAVITY is a new instrument to coherently combine the light of the European Southern Observatory Very Large Telescope Interferometer to form a telescope with an equivalent 130m diameter angular resolution and a collecting area of 200 m(2). The instrument comprises fiber fed integrated optics beam combination, high resolution spectroscopy, built-in beam analysis and control, near-infrared wavefront sensing, phase-tracking, dual-beam operation, and laser metrology. GRAVITY opens up to optical/infrared interferometry the techniques of phase referenced imaging and narrow angle astrometry, in many aspects following the concepts of radio interferometry. This article gives an overview of GRAVITY and reports on the performance and the first astronomical observations during commissioning in 2015/16. We demonstrate phase-tracking on stars as faint as m(K) approximate to 10 mag, phase-referenced interferometry of objects fainter than m(K) approximate to 15 mag with a limiting magnitude of m(K) approximate to 17 mag, minute long coherent integrations, a visibility accuracy of better than 0.25%, and spectro-differential phase and closure phase accuracy better than 0.5 degrees, corresponding to a differential astrometric precision of better than ten microarcseconds (as). The dual-beam astrometry, measuring the phase difference of two objects with laser metrology, is still under commissioning. First observations show residuals as low as 50 mu as when following objects over several months. We illustrate the instrument performance with the observations of archetypical objects for the different instrument modes. Examples include the Galactic center supermassive black hole and its fast orbiting star S2 for phase referenced dual-beam observations and infrared wavefront sensing, the high mass X-ray binary BP Cru and the active galactic nucleus of PDS 456 for a few mu as spectro-differential astrometry, the T Tauri star S CrA for a spectro-differential visibility analysis, xi Tel and 24 Cap for high accuracy visibility observations, and eta Car for interferometric imaging with GRAVITY.