Abstract
One way to mitigate the high costs of doing science or business at sea is to create technological infrastructures possessing all the skills and resources needed for successful maritime operations, and make those capabilities and skills available to the external entities requiring them. By doing so, the individual economic and scientific agents can be spared the enormous effort of creating and maintaining their own, particular set of equivalent capabilities, thus drastically lowering their initial operating costs. In addition to cost savings, operating based on fully-fledged, shared infrastructures not only allows the use of more advanced scientific equipment and highly skilled personnel, but it also enables the business teams (be it industry or research) to focus on their goals, rather than on equipment, logistics, and support. This paper will describe the TEC4SEA infrastructure, created precisely to operate as described. This infrastructure has been under implementation in the last few years, and has now entered its operational phase. This paper will describe it, present its current portfolio of services, and discuss the most relevant assets and facilities that have been recently acquired, so that the research and industrial communities requiring the use of such assets can fully evaluate their adequacy for their own purposes and projects.

Abstract
Several research works have applied Reinforcement Learning (RL) algorithms to solve the Rate Adaptation (RA) problem in Wi-Fi networks. The dynamic nature of the radio link requires the algorithms to be responsive to changes in link quality. Delays in the execution of the algorithm due to implementional details may be detrimental to its performance, which in turn may decrease network performance. These delays can be avoided to a certain extent. However, this aspect has been overlooked in the state of the art when using simulated environments, since the computational delays are not considered. In this paper, we present an analysis of computational delays and their impact on the performance of RL-based RA algorithms, and propose a methodology to incorporate the experimental computational delays of the algorithms from running in a specific target hardware, in a simulation environment. Our simulation results considering the real computational delays showed that these delays do, in fact, degrade the algorithm’s execution and training capabilities which, in the end, has a negative impact on network performance.

Abstract
The increasing use of wearable electronics calls for sustainable energy solutions. Biomechanical energy harvesting appears as an attractive solution to replace the use of batteries in wearables, as the body generates sufficient power to drive small electronics. In particular, triboelectric nanogenerators (TENGs) have emerged as a promising approach due to its lightweight and high power density. In this work, a TENG is hybridized with an electromagnetic generator (EMG) to harvest energy from the foot strike. An enclosed radial-flow turbine is optimized and used to convert the foot-strike low-frequency linear movement into a higher-frequency rotational motion (by a factor of & AP;12). Besides increasing the motion frequency, the employed mechanism is physically robust and enables a continuous operation from irregular mechanical excitations. A single TENG unit operating in the freestanding mode generated an optimal power of 4.72 & mu;W and transferred a short-circuit charge of 2.3 nC. The TENG+EMG hybridization allows to power a digital pedometer even after the mechanical input stopped. Finally, the energy harvester is incorporated into a commercial shoe to power the same pedometer from foot walking. The obtained results validate the developed prototype ability to serve as a portable power source that can drive sensors and wearable electronics.

Abstract
This paper introduces two machine learning optimization algorithms to significantly enhance position estimation in Reconfigurable Intelligent Surface (RIS) aided localization for mobile user equipment in Non-Line-of-Sight conditions. Leveraging the strengths of these algorithms, we present two methods capable of achieving extremely high accuracy, reaching sub-centimeter or even sub-millimeter levels at 3.5 GHz. The simulation results highlight the potential of these approaches, showing significant improvements in indoor mobile localization. The demonstrated precision and reliability of the proposed methods offer new opportunities for practical applications in real-world scenarios, particularly in Non-Line-of-Sight indoor localization. By evaluating four optimization techniques, we determine that a combination of a Genetic Algorithm (GA) and Particle Swarm Optimization (PSO) results in localization errors under 30 cm in 90 % of the cases, and under 5 mm for close to 85 % of cases when considering a simulated room of 10 m by 10m where two of the walls are equipped with RIS tiles.

Abstract
For reconfigurable radios where the signals can be easily routed from one band to another band, new radio frequency switches (RF) are a fundament. The main factor driving the power consumption of the reconfigurable intelligent system (RIS) is the need for an intermediate device with static power consumption to maintain a certain surface configuration state. Since power usage scales quadratically with the RIS area, there is a relevant interest in mitigating this drawback so that this technology can be applied to everyday objects without needing such a high intrinsic power consumption. Current switch technologies such as PIN diodes, and field effect transistors (FETs) are volatile electronic devices, resulting in high static power. In addition, dynamic power dissipation related to switching event is also considerable. Regarding energy efficiency, non-volatile radio frequency resistive switch (RFRS) concept may be better alternative solution due to several advantages: smaller area, zero-hold voltage, lower actuation bias for operation, short switching time, scalability and capable to be fabricated in the backend-of-line of standard CMOS process.

Abstract
Future telecommunications aim to be ubiquitous and efficient, as widely deployed connectivity will allow for a variety of edge/fog based services. Challenges are numerous, e.g., spectrum overuse, energy efficiency, latency and bandwidth, battery life and computing power of edge devices. Addressing these challenges is key to compose the backbone for the future Internet-of-Things (IoT). Among IoT applications are Indoor Positioning System and indoor Real-Time-Location-Systems systems, which are needed where GPS is unviable. The Bluetooth Low Energy (BLE) 5.1 specification introduced Direction Finding to the protocol, allowing for BLE devices with antenna arrays to derive the Angle-of-Arrival (AoA) of transmissions. Well known algorithms for AoA calculation are computationally demanding, so recent works have addressed this, since the low-cost of BLE devices may provide efficient solutions for indoor localization. In this paper, we present a system topology and algorithms for self-localization where a receiver with an antenna array utilizes the AoAs from fixed battery powered beacons to self-localize, without a centralized system or wall-power infrastructure. We conduct two main experiments using a BLE receiver of our own design. Firstly, we validate the expected behaviour in an anechoic chamber, computing the AoA with an RMSE of 10.7 degrees conduct a test in an outdoor area of 12 by 12 meters using four beacons, and present pre-processing steps prior to computing the AoAs, followed by position estimations achieving a mean absolute error of 3.6 m for 21 map positions, with a minimum as low as 1.1 m.