Abstract

Abstract
In this work, we report for the first time the accumulation activity by energized rat heart mitochondria and the ionic transfer process at a liquid liquid interface of a novel mitochondria-targeted antioxidant, named as AntiOxCIN(4), which is structurally based on a hydroxycinnamic acid. Lipophilicity studies conducted at the water/1,6-dichlorohexane (DCH) interface allowed the building up of an ionic partition diagram of AntiOxCIN(4) in accordance with the electrochemical data obtained. The partition coefficients of both positively charged (-2.3) and zwitterionic (0.2) forms of the antioxidant were determined. This study contributed to gaining an insight about the ability of the synthesized antioxidants to cross biomembrane barriers by using an interface between two immiscible electrolyte solutions (ITIES) as a model system.

Abstract
In this work, electrically-conducting poly(Toludine Blue) was employed for the first time as synthetic receptor film, prepared by Molecular Imprinting strategies and using electrochemical methods, for the specific screening of breast cancer biomarker Carbohydrate Antigen 15.3 (CA 15-3). The protein imprinted poly(Toluidine Blue) film was grown in a pre-formed Toluidine Blue (TB) tailed SAM at the AuSPE surface, which greatly enhanced the stability against degradation of the Molecular Imprinted Polymer (MIP) film at the electrode surface. The MIP receptor film recognition ability towards the protein was investigated by fitting data to Freundlich isotherm. The binding affinity (K-p) obtained for the MIP system was significantly higher (similar to 12-fold) to that obtained for the NIP system, demonstrating the success of the approach in creating imprinted materials that specifically respond to CA 15-3 protein. The incubation of the MIP modified electrode with increasing concentration of protein (from 0.10 U mL(-1) to 1000 U mL(-1)) resulted in a decrease of the ferro/ferricyanide redox current. The device displayed linear response from 0.10 U mL(-1) to 100 U mL(-1) and LODs below 0.10 U mL(-1) were obtained from calibration curves built in neutral buffer and diluted artificial serum, using DPV technique, enabling the detection of the protein biomarker at clinically relevant levels. The developed MIP biosensor was applied to the determination of CA 15-3 in spiked serum samples with satisfactory results. The developed device provides a new strategy for sensitive, rapid, simple and cost-effective screening of CA 15-3 biomarker. Importantly, the overall approach seems suitable for point-of-care (PoC) use in clinical context.

Abstract
Long period fiber gratings (LPFGs) were used to monitor the characteristics of copper (Cu) thin films when annealed in air atmosphere up to similar to 680 degrees C. The wavelength and the optical power shift of the resonant bands of the LPFGs when coated with the Cu thin films, were measured as a function of the annealing temperature, and were found to exhibit a different evolution comparing to a bare LPFGs. Thin films of Cu deposited on quartz (SiO2) substrates were annealed and analyzed by XRD, SEM/EDS and Raman spectroscopy, allowing to identify the formation of two distinct oxide phases at different temperatures, cuprous (Cu2O-cuprite) and cupric (CuO-tenorite) oxides, respectively. The observed features of the resonant bands of the LPFGs were found to be associated with the Cu oxide phase transitions, indicating the possibility of using LPFGs to monitor, in real time, the oxidation states of Cu thin films by following specific characteristics of the attenuation bands. In addition, LPFGs over coated with the two distinct oxidation phases of Cu were characterized for refractive index sensing in the range between 1.300 to 1.600, leading to the conclusion that the sensitivity to the refractive index of the surrounding medium of Cu coated LPFGs sensing systems can be temperature tuned.

Abstract
A study of long period fiber gratings (LPFG) over coated with iron (Fe) and subjected to oxidation in water with different sodium chloride (NaCl) concentrations is presented. The formation of iron oxides and hydroxides was monitored in real time by following the features of the LPFG attenuation band. Preliminary results show that Fe coated LPFGs can be used as sensors for early warning of corrosion in offshore and in coastal projects where metal structures made of iron alloys are in contact with sea or brackish water.

Abstract
In this work an investigation of long period fiber gratings (LPFGs) over coated with iron (Fe) thin layers with different thicknesses and subjected to oxidation in air atmosphere under controlled temperature is presented. The formation of iron oxides was monitored in real time by following the optical features of the LPFG attenuation band. The morphology of the oxide layer was further analyzed by scanning electron microscope (SEM). Preliminary results show that iron coated LPFGs can be used as sensors for early warning of corrosion in projects where metal structures made of iron alloys are in contact with atmospheric air.