Abstract
To properly validate wireless networking solutions we depend on experimentation. Simulation very often produces less accurate results due to the use of models that are simplifications of the real phenomena they try to model. Networking experimentation may offer limited repeatability and reproducibility. Being influenced by external random phenomena such as noise, interference, and multipath, real experiments are hardly repeatable. In addition, they are difficult to reproduce due to testbed operational constraints and availability. Without repeatability and reproducibility, the validation of the networking solution under evaluation is questionable. In this paper, we show how the Trace-based Simulation (TS) approach can be used to accurately repeat and reproduce real experiments and, consequently, introduce a paradigm shift when it comes to the evaluation of wireless networking solutions. We present an extensive evaluation of the TS approach using the Fed4FIRE+ w-iLab.2 testbed. The results show that it is possible to repeat and reproduce real experiments using Network Simulator 3 (ns-3) trace-based simulations with more accuracy than in pure simulation, with average accuracy gains above

Abstract
Wi-Fi networks are becoming more and more ubiquitous and represent a substantial source of energy consumption around the globe, mainly when it comes to Access Points (APs). There has been some work done on the characterization of the power consumption of Wi-Fi APs and network interface cards (NICs), and the power usage of these devices under different configurations and standards but mostly using legacy standards. A detailed AP power consumption analysis, exploring the whole set of degrees of freedom and capabilities of these devices is lacking in the state of the art. In this paper, we present a thorough power consumption analysis, covering the configuration options available in enterprise Wi-Fi APs from the three major vendors on the market. The goal is to understand how the power consumption of an AP varies with the different configurations, and provide insights on the parameters that significantly affect the AP power consumption. The obtained experimental results confirm previous state-of-the-art conclusions but contradict some of the studies and results found in the literature, while updating results and conclusions taken in the past to the most recent standards, configurations, and data rates available today. The analysis provided herein is a valuable source of information for deriving new AP power consumption models and designing energy-efficient Wi-Fi networks.

Abstract
Wi-Fi networks lack energy consumption management mechanisms. In particular, during nighttime periods, the energy waste may be significant, since all Access Points (APs) are kept switched on even though there is minimum or null traffic demand. The fact that more than 80% of all wireless traffic is originated or terminated indoor, and served by WiFi, has led the scientific community to look into energy saving mechanisms forWi-Fi networks. State of the art solutions address the problem by switching APs on and off based on manually inserted schedules or by analyzing real-time traffic demand. The first are vendor specific; the second may induce frequent station (STA) handoffs, which has an impact on network performance. The lack of implementability of solutions is also a shortcoming in most works. We propose an algorithm, named Energy Consumption Management Algorithm (ECMA), that learns the daytime and nighttime periods of the Wi-Fi network. ECMA was designed having in mind its implementability over legacyWi-Fi equipment. At daytime, the radio interfaces of the AP (2.4 GHz and 5 GHz) are switched on and off automatically, according to the traffic demand. At nighttime, clusters of APs, covering the same area, are formed, leaving one AP always switched on for basic coverage and the redundant APs swichted off to maximize energy savings, while avoiding coverage and performance hampering. Simulation results show energy savings of up to 50% are possible using the ECMA algorithm.

Abstract
The heated 5G network deployment race has already begun with the rapid progress in standardization efforts, backed by the current market availability of 5G-enabled network equipment, ongoing 5G spectrum auctions, early launching of non-standalone 5G network services in a few countries, among others. In this paper, we study current and future wireless networks from the viewpoint of energy efficiency (EE) and sustainability to meet the planned network and service evolution toward, along, and beyond 5G, as also inspired by the findings of the EU Celtic-Plus SooGREEN Project. We highlight the opportunities seized by the project efforts to enable and enrich this green nature of the network as compared to existing technologies. In specific, we present innovative means proposed in SooGREEN to monitor and evaluate EE in 5G networks and beyond. Further solutions are presented to reduce energy consumption and carbon footprint in the different network segments. The latter spans proposed virtualized/cloud architectures, efficient polar coding for fronthauling, mobile network powering via renewable energy and smart grid integration, passive cooling, smart sleeping modes in indoor systems, among others. Finally, we shed light on the open opportunities yet to be investigated and leveraged in future developments.

Abstract
Optical modulation characteristics of resonant tunneling diode photodetectors (RTD-PD) are investigated. Intensity modulated light excites the RTD-PDs to conduct data experiments. Simple and complex data patterns are used with results showing data rates up to 80 and 200 Mbit/s, respectively. This is the first demonstration of complex modulation using resonant tunneling diodes.

Abstract
We report on the direct intensity modulation characteristics of a high-speed resonant tunneling diode-photodetector (RTD-PD) with an oscillation frequency of 79 GHz. This work demonstrates both electrical and optical modulation and shows that RTD-PD oscillators can be utilized as versatile optoelectronic/radio interfaces. This is the first demonstration of optical modulation of an RF carrier using integrated RTD-PD oscillators at microwave frequencies. (C) 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement.