Abstract
This work studies the influence of an Erbium-Doped Fiber Amplifier (EDFA) on the phase variation of light in an optical fiber. To this end, the state of polarization (SOP) was measured as a function of optical power by adjusting the EDFA amplification, for two different laser output powers (2 dBm and 5 dBm). Results show that phase variation correlates with changes in optical power in both cases.

Abstract
Research on Programmable Electromagnetic Surfaces has gained considerable attention as an enabling technology for 6G communications, particularly at millimeter-wave and sub-THz bands. However, RISs face challenges related to the need for high-performance reconfigurable techniques that offer compact size and reduced power consumption at high frequencies. Moreover, the experimental characterization of unit cell performance using a waveguide remains a challenging issue. This paper discusses the design and performance analysis of a 1-bit reconfigurable unit cell at the Dband using non-volatile reconfigurable technology. The efficiency analysis of the unit cell was performed using periodic boundary conditions and waveguide configurations to mitigate simulation risks and validate the proposed design at the unit cell level. All simulation configurations confirmed an operational bandwidth of 25.65 GHz across the 147.8-173.45 GHz range, with a reflection loss of less than 1 dB and a phase difference within 180 degrees +/- 20 degrees.

Abstract
A comparative analysis of Ka and D-band unit cells is presented using a Waveguide Simulator and infinite array models with a Floquet port. Initially, a single-unit cell design is employed with a tapered transition section. Subsequently, a 1 x 2-unit cell is designed and integrated into standard rectangular waveguides WR-34 and WR-7. For the Ka-band, the results obtained from both models exhibit excellent agreement in terms of magnitude and phase. In the D-band, the 1 x 2-unit cell demonstrated low loss for both techniques, and the phase responses were reasonably accurate with differences of less than 40 degrees. At such high frequencies (145-175 GHz), the Waveguide Simulator offers a viable solution for assessing the behavior of the unit cell without the need for a full array.

Abstract
The Sub-THz and millimeter-wave bands have gained popularity, with the expectation that they will host the next generation of wireless communication systems. Furthermore, research on beam-steering characteristics provided by Programmable Electromagnetic Surfaces, such as Reflective Intelligent Surfaces (RISs), has garnered considerable attention as an enabling technology for 6G communications. Due to size limitations, RISs face challenges related to power consumption in the reconfigurable elements and their integration with unit cells operating at high frequencies. This paper discusses the design of a 1-bit reconfigurable unit cell at the D-band using non-volatile technology to minimize static power consumption. Simulation results show that the proposed unit cell performs well with a reflection loss of less than 1.3 dB in both reconfigurable states across a frequency band from 120 to 170 GHz. Moreover, the phase difference between the two states is maintained at 180 degrees +/- 20 degrees, with an operational bandwidth of approximately 16 GHz. The beamforming capabilities, with steering angles from -60 degrees to 60 degrees, of the 12x12 RIS, utilizing the proposed unit cell, have been demonstrated in terms of controlling the main beam radiation precisely to various angles with consistent performance at frequencies of 147GHz,152GHz, and 152.5 GHz.

Abstract
This paper presents an experimental investigation of sigma-delta modulation (SDM) as a means of improving the performance of underwater optical communication systems. The study considers the impact of the key parameters of SDM, including oversampling ratio, the system's signal-to-noise ratio, bandwidth, and optical link distance. The results of this study provide insights into the design and optimization of SDM-based underwater optical communication systems, paving the way for future research in this field. A fully digital solution, albeit operating at a lower bit rate than previously published OFDM counterparts, provides immunity against nonlinearities of the system and robustness to noise, which is relevant in harsh environments. Moreover, the proposed solution based on a first-order bandpass SDM architecture avoids the employment of a DAC at the receiver, simplifying its operation and reducing costs. An experimental investigation is carried out for the transmission of 16-QAM over SDM, and a transmission distance of 4.8 m over the underwater channel is achieved with a maximum transmission rate of 400 Mbit/s with an MER of 28 dB.