Abstract
In this letter, we propose a method for utilizing the internal cavities of optical circulator devices-commonly referred to as parasitic cavities-as optical reference cavities. The method involves using an optical circulator operating at 1550 nm, illuminated by a light source at 1330 nm, thereby enhancing the amplitude of the interferometric signals generated by the internal optical cavities. The system was characterized by using both an Optical Spectrum Analyzer (OSA) and the Low-Coherence Interferometry (LCI) technique. Experimental results indicate that the Optical Path Difference (OPD) remains constant with varying aperture sizes, thereby confirming the feasibility of employing the optical circulator as a reference sensor. Finally, its performance as a reference sensor is demonstrated through its integration with an external cavity that functions as a displacement sensor.

Abstract
This work presents an implementation of a reference optical cavity based on parasitic cavities on a low coherence interferometric system. This method allows a maximization of the number of sensors to be implemented without occupying additional reading channels.

Abstract
This work proposes a signal processing algorithm to analyse the optical signal from a Low Coherence Interferometric (LCI) system. The system uses a Mach-Zehnder (MZ) interferometer to interrogate a Fabry-Perot cavity, working as an optical sensor. This algorithm is based on the correlation and convolution operations, which allows the signal to be reconstructed based on itself, as well as, on the linearization of the signal phase, allowing the non-linearities of the actuator incorporated on the MZ interferometer to be compensated. The results show a noise reduction of 30 dB in the signal acquired. As a result, a reduction of 8.2 dB in the uncertainty of the measurement of the physical measurand is achieved. It is also demonstrated that the phase linearization made it possible to obtain a coefficient of determination (namely, R-squared) higher than 0.999.

Abstract
The aim of this work is to introduce a novel digital signal processing method for data acquired using low coherence interferometry (LCI) with a 1-kHz actuator oscillation frequency. Convolution and correlation operations are employed as efficient filters, reducing computational complexity for multilayer filtering. An envelope filtering technique is developed to address discrepancies in peak signal determination caused by nonlinear actuator motion. Additionally, a phase linearization method is presented to normalize the peak position relative to the actuator signal. Experimental results demonstrate a significant signal-to-noise ratio (SNR) improvement of 50 dB. Long-term measurements reveal an 11-dB noise reduction for frequencies below 1 mHz. This research enables LCI implementation at sampling rates of at least 1 kHz and expands its applicability to extreme measurement conditions.

Abstract
This paper presents a new type of phase-shifted Fiber Bragg Grating (FBG): the sliced-FBG (SFBG). The fabrication process involves cutting a standard FBG inside its grating region. As a result, the last grating pitch is shorter than the others. The optical output signal consists of the overlap between the FBG reflection and the reflection at the fiber-cleaved tip. This new fiber optic device has been studied as a vibration sensor, allowing for the characterization of this sensor in the frequency range of 150 Hz to 70 kHz. How the phase shift in the FBG can be controlled by changing the length of the last pitch is also shown. This device can be used as a filter and a sensing element. As a sensing element, we will demonstrate its application as a vibration sensor that can be utilized in various applications, particularly in monitoring mechanical structures.

Abstract
CubeSats are becoming an alternative challenge for space exploration. Research in the technology and applicability of these small platforms has received an increasing interest in the last years. They represent an emergent technological market (CAGR growth of 37.91 % in the 2017-2021 period), while a variety of fields like meteorology, climatic research, transportation safety, or navigation is resorting to this technology. As more complex CubeSats missions are defined, a natural increase in the mission power demand occurs. In a scarce-resource environment like the space, this demands the development of new ways of harvesting spacecraft electrical energy. An alternative to traditional energy harvesting systems composed of solar panels and batteries is Wireless Energy Transfer (WET). It originates in the electromagnetic transfer, proven to have two important limitations: high power efficiency decrease at distances bigger than coil size and the need of mobile parts. A new approach is proposed as a solution to these limitations: the possibility of mounting on a 3U CubeSat photo-thermoelectric generator array devices that can convert photon energy to electrical energy via thermal gradient generation. For creating the thermal gradient, a long-range laser source targets cells from each array forming the hybrid photo-thermoelectric plasmonic system (HPTP). Two possible scenarios are presented in terms of mission requirements and analysis: a controlled pulsed large-range laser source located on Earth, in the case of Earth-orbiting missions, or on a hub system, in a deep-space mission. For Earth, Mars and Jupiter, a simulation of the total energy produced by solar panels and the HPTP system is presented to illustrate the potential use of the WiPTherm technology. In each of the scenarios, key measures of effectiveness will be analysed to overcome potential CubeSat and constituent subsystems overheat, by comparison with nominal component and shield temperature profiles in both eclipse and illuminated cases when the HPTP system is not used. Pointing budget accuracy and jitter for targeting the HPTP generator cells and required laser link budget for a planned energy transfer efficiency of up to 10 % of the source power are other challenges covered in the presentation, apart from research topics from a multidisciplinary group covering nanomaterials science, optics, photonics, and CubeSats power systems engineering. Copyright