Abstract
In mobile networks, 5G Ultra-Dense Networks (UDNs) have emerged as they effectively increase the network capacity due to cell splitting and densification. A Base Station (BS) is a fixed transceiver that is the main communication point for one or more wireless mobile client devices. As UDNs are densely deployed, the number of BSs and communication links is dense, raising concerns about resource management with regard to energy efficiency, since BSs consume much of the total cost of energy in a cellular network. It is expected that 6G next-generation mobile networks will include technologies such as artificial intelligence as a service and focus on energy efficiency. Using machine learning it is possible to optimize energy consumption with cognitive management of dormant, inactive and active states of network elements. Reinforcement learning enables policies that allow sleep mode techniques to gradually deactivate or activate components of BSs and decrease BS energy consumption. In this work, a sleep mode management based on State Action Reward State Action (SARSA) is proposed, which allows the use of specific metrics to find the best tradeoff between energy reduction and Quality of Service (QoS) constraints. The results of the simulations show that, depending on the target of the 5G use case, in low traffic load scenarios and when a reduction in energy consumption is preferred over QoS, it is possible to achieve energy savings up to 80% with 50 ms latency, 75% with 20 ms and 10 ms latencies and 20% with 1 ms latency. If the QoS is preferred, then the energy savings reach a maximum of 5% with minimal impact in terms of latency.

Abstract
Task scheduling is a significant challenge in the cloud environment as it affects the network's performance regarding the workload of the cloud machines. It also directly impacts the consumed energy, therefore the profit of the cloud provider. This paper proposed an algorithm that prioritizes the tasks regarding their execution deadline. We also categorize the physical machines considering their configuration status. Henceforth, the proposed method assigns the jobs to the physical machines with the same priority class close to the user. Furthermore, we reduce the consumed energy of the machines processing the low-priority tasks using the DVFS method. The proposed method migrates the jobs to maintain the workload balance, or if the machines' class changed according to their scores. We have evaluated and validated the proposed method in the CloudSim library. The simulation results demonstrate that the proposed method optimized energy consumption by 12% and power consumption by 20%.

Abstract
Monitoring security and quality of service is essential, due to the rapid growth of the number of nodes in wireless networks. In healthcare/industrial environments, especially in wireless body area networks (WBANs), this is even more important. Because the delays and errors can directly affect patients'/scientists' health. To increase the Monitoring Quality of Services (MQoS) in WBANs, a secure medium access control (MAC) protocol needs to be developed to provide optimal services. This article provides a comprehensive review of MAC protocols in WBANs with a technical security analysis approach. Time-based, contention-based, and hybrid protocols are compared in this article, regarding MQoS and their security vulnerabilities. We have considered delay, packet loss, and energy consumption as performance evaluation criteria in WBANs, which may be degraded under a cyberattack. This work shows that there is a research gap in the literature, which is the failure of covering security and privacy issues in the MAC layer protocols.

Abstract
The sharing of cyberthreat information within a community or group of entities is possible due to solutions such as the Malware Information Sharing Platform (MISP). However, the MISP was considered limited if its information was deemed as classified or shared only for a given period of time. A solution using searchable encryption techniques that better control the sharing of information was previously proposed by the same authors. This paper describes a prototype implementation for two key functionalities of the previous solution, considering multiple entities sharing information with each other: the symmetric key generation of a sharing group and the functionality to update a shared index. Moreover, these functionalities are evaluated regarding their performance, and enhancements are proposed to improve the performance of the implementation regarding its execution time. As the main result, the duration of the update process was shortened from around 2922 s to around 302 s, when considering a shared index with 100,000 elements. From the security analysis performed, the implementation can be considered secure, thus confirming the secrecy of the exchanged nonces. The limitations of the current implementation are depicted, and future work is pointed out.

Abstract
The role of new technologies such as additive manufacturing and blockchain technology in designing and implementing circular economy ecosystems is not a trivial issue. This study aimed to understand if blockchain technology can be an enabler tool for developing additive symbiotic networks. A real case study was developed regarding a circular economy ecosystem in which a fused granular fabrication 3D printer is used to valorize polycarbonate waste. The industrial symbiosis network comprised four stakeholders: a manufacturing company that produces polycarbonate waste, a municipality service responsible for the city waste management, a start-up holding the 3D printer, and a non-profit store. It was identified a set of six requirements to adopt the blockchain technology in an additive symbiotic network, bearing in mind the need to have a database to keep track of the properties of the input material for the 3D printer during the exchanges, in addition to the inexistence of mechanisms of trust or cooperation between well-established industries and the additive manufacturing industry. The findings suggested a permissioned blockchain to support the implementation of the additive symbiotic network, namely, to enable the physical transactions (quantity and quality of waste material PC sheets) and monitoring and reporting (additive manufacturing technology knowledge and final product's quantity and price).Future research venues include developing blockchain-based systems that enhance the development of ad-ditive symbiotic networks.