Abstract
For efficient planning of waste collection routing, large municipalities may be partitioned into convenient sectors. The real case under consideration is the municipality of Monção, in Portugal. Waste collection involves more than 1600 containers over an area of 220 km2 and a population of around 20,000 inhabitants. This is mostly a rural area where the population is distributed in small villages around the 33 boroughs centres (freguesia) that constitute the municipality. In most freguesias, waste collection is usually conducted 3 times a week. However, there are situations in which the same collection is done every day. The case reveals some general and specific characteristics which are not rare, but are not widely addressed in the literature. Furthermore, new methods and models to deal with sectorization and routing are introduced, which can be extended to other applications. Sectorization and routing are tackled following a three-phase approach. The first phase, which is the main concern of the presentation, introduces a new method for sectorization inspired by Electromagnetism and Coulomb’s Law. The matter is not only about territorial division, but also the frequency of waste collection, which is a critical issue in these types of applications. Special characteristics related to the number and type of deposition points were also a motivation for this work. The second phase addresses the routing problems in each sector: new Mixed Capacitated Arc Routing with Limited Multi-Landfills models will be presented. The last phase integrates Sectoring and Routing. Computational results confirm the effectiveness of the entire novel approach.

Abstract
In this paper a constructive heuristic for solving the staff scheduling problem of a glass manufacture unit is proposed. Based on simple calculations and algorithms, the developed procedure assigns working shifts and days-off to teams of employees, ensuring the satisfaction of a mandatory sequence of working shifts and the balance of the workload between employees. The computational times for the experiments with the case study company, with three eight-hour working shifts and five teams of employees, fell consistently below 5 seconds for a set of different planning periods. Results are compared with the ones achieved with an optimization model (MIP), demonstrating the good performance of the heuristic, also in terms of the quality of the achieved solutions. The heuristic rarely fails to produce a feasible solution and whenever the solution is feasible then it is also optimal. When tackling problems with a large number of teams, the heuristic maintains the good performance while the MIP model is not able to find any solution within 16 hours of running time. Although it was designed for a particular problem of the glass industry, tests show that the heuristic is flexible enough to be applied to problems with different features, from other activity sectors, encouraging further extensions of this work.

Abstract
Cutting and packing problems have been extensively studied in the literature in recent decades, mainly due to their numerous real-world applications while at the same time exhibiting intrinsic computational complexity. However, a major limitation has been the lack of problem generators that can be widely and commonly used by all researchers in their computational experiments. In this paper, a problem generator for every type of two-dimensional rectangular cutting and packing problems is proposed. The problems are defined according to the recent typology for cutting and packing problems proposed by Wascher, Haussner, and Schumann (2007) and the relevant problem parameters are identified. The proposed problem generator can significantly contribute to the quality of the computational experiments run with cutting and packing problems and therefore will help improve the quality of the papers published in this field.

Abstract
In the Container Loading Problem literature, the cargo dynamic stability constraint has been evaluated by the percentage of boxes with insufficient lateral support. This metric has been used as a proxy for the real-world dynamic stability constraint and has conditioned the algorithms developed for this problem. It has the advantage of not being expensive from a computation perspective. However, guaranteeing that at least three sides of a box are in contact with another box or with the container wall does not necessarily ensure stability during transportation. In this paper we propose a physics simulation tool based on a physics engine that will be used in the evaluation of the dynamic stability constraint. We compare the results of our physics simulation tool with the state-of-the-art simulation engineering software Abaqus Unified FEA, and conclude that our tool is a promising alternative.

Abstract
Empty repositions are a major problem for car rental companies that deal with special types of vehicles whose number of units is small. In order to meet reservation requirements concerning time and location, companies are forced to transfer cars between rental stations, bearing significant costs and increasing the environmental impact of their activity due to the fuel consumption and CO2 emission. In this paper, this problem is tackled under a vehicle-reservation assignment framework as a network-flow model in which the profit is maximized. The reservations are allocated considering the initial and future availability of each car, interdependencies between rental groups, and different reservation priorities. To solve this model, a relax-and-fix heuristic procedure is proposed, including a constraint based on local branching that enables and controls modifications between iterations. Using real instances, the value of this approach is established and an improvement of 33% was achieved when compared to the company's current practices.

Abstract
Airports have traditionally been considered as public utility providers, with little potential to develop significant market opportunities. Liberalisation of the air transport market around the globe has introduced new dynamics into the airport industry. The emergence of competition and the transition in ownership (towards privatisation or commercialisation) demand a different perspective in airport management. This paper aims at explaining the complexity of the airport business, in particular in what concerns the role of the airport as a firm that operates in a network of stakeholders, to produce a set of service packages targeted at several types of customers. (C) 2013 The Authors. Published by Elsevier Ltd. Selection and/or peer-review under responsibility of Scientific Committee