Abstract
The bedbug and the grape moth are the most significant pests affecting rice and vineyards, causing great damage. However, these pests are only two examples of the many insect pests that exist with great potential to cause significant crop damage. Insect traps are among the most appropriate solution for monitoring and counting, influencing the selection and dosage of the pesticide to be applied for pest control. However, the counting and monitoring operations are based on the frequent visit of technicians to the site and are supported by inefficient counting methods, which is a challenging and time-consuming task. This study proposes the automatic counting of bedbugs and grape moths in traps using deep learning algorithms. We use three different databases, Pest24, Bedbug and Grape moth. Pest24 is a public dataset with a great diversity of insects. The Bedbugs and the Grape moth datasets are private datasets provided by mySense, a precision agriculture platform developed and managed by researchers from the University of Tras-os-Montes e Alto Douro (UTAD). First, we trained the Pest24 dataset with YOLOv5, and we got an mAP of 69.3%. Then, using the weights obtained from the Pest24 dataset, we trained the Bedbug and Grape moth datasets. The best results for the bedbug dataset were obtained with the YOLOv5 with transfer learning with an AP of 96.5% and a counting error of 63.3%. The best result was obtained with YOLOv5 without transfer learning of Pest24 with an AP of 90.9% and a counting error of 6.7 for the Grape moth.

Abstract
Vineyard classification is an important process within viticulture-related decision-support systems. Indeed, it improves grapevine vegetation detection, enabling both the assessment of vineyard vegetative properties and the optimization of in-field management tasks. Aerial data acquired by sensors coupled to unmanned aerial vehicles (UAVs) may be used to achieve it. Flight campaigns were conducted to acquire both RGB and multispectral data from three vineyards located in Portugal and in Italy. Red, green, blue and near infrared orthorectified mosaics resulted from the photogrammetric processing of the acquired data. They were then used to calculate RGB and multispectral vegetation indices, as well as a crop surface model (CSM). Three different supervised machine learning (ML) approaches-support vector machine (SVM), random forest (RF) and artificial neural network (ANN)-were trained to classify elements present within each vineyard into one of four classes: grapevine, shadow, soil and other vegetation. The trained models were then used to classify vineyards objects, generated from an object-based image analysis (OBIA) approach, into the four classes. Classification outcomes were compared with an automatic point-cloud classification approach and threshold-based approaches. Results shown that ANN provided a better overall classification performance, regardless of the type of features used. Features based on RGB data showed better performance than the ones based only on multispectral data. However, a higher performance was achieved when using features from both sensors. The methods presented in this study that resort to data acquired from different sensors are suitable to be used in the vineyard classification process. Furthermore, they also may be applied in other land use classification scenarios.

Abstract
Efficient detection and monitoring procedures of invasive plant species are required. It is of crucial importance to deal with such plants in aquatic ecosystems, since they can affect biodiversity and, ultimately, ecosystem function and services. In this study, it is intended to detect water hyacinth (Eichhornia crassipes) using multispectral data with different spatial resolutions. For this purpose, high-resolution data (<0.1 m) acquired from an unmanned aerial vehicle (UAV) and coarse-resolution data (10 m) from Sentinel-2 MSI were used. Three areas with a high incidence of water hyacinth located in the Lower Mondego region (Portugal) were surveyed. Different classifiers were used to perform a pixel-based detection of this invasive species in both datasets. From the different classifiers used, the results were achieved by the random forest classifiers stand-out (overall accuracy (OA): 0.94). On the other hand, support vector machine performed worst (OA: 0.87), followed by Gaussian naive Bayes (OA: 0.88), k-nearest neighbours (OA: 0.90), and artificial neural networks (OA: 0.91). The higher spatial resolution from UAV-based data enabled us to detect small amounts of water hyacinth, which could not be detected in Sentinel-2 data. However, and despite the coarser resolution, satellite data analysis enabled us to identify water hyacinth coverage, compared well with a UAV-based survey. Combining both datasets and even considering the different resolutions, it was possible to observe the temporal and spatial evolution of water hyacinth. This approach proved to be an effective way to assess the effects of the mitigation/control measures taken in the study areas. Thus, this approach can be applied to detect invasive species in aquatic environments and to monitor their changes over time.

Abstract
Modelling of material appearance from reflectance measurements has become increasingly prevalent due to the development of novel methodologies in Computer Graphics. In the last few years, some advances have been made in measuring the light-material interactions, by employing goniometers/reflectometers under specific laboratory's constraints. A wide range of applications benefit from data-driven appearance modelling techniques and material databases to create photorealistic scenarios and physically based simulations. However, important limitations arise from the current material scanning process, mostly related to the high diversity of existing materials in the real-world, the tedious process for material scanning and the spectral characterisation behaviour. Consequently, new approaches are required both for the automatic material acquisition process and for the generation of measured material databases. In this study, a novel approach for material appearance acquisition using hyperspectral data is proposed. A dense 3D point cloud filled with spectral data was generated from the images obtained by an unmanned aerial vehicle (UAV) equipped with an RGB camera and a hyperspectral sensor. The observed hyperspectral signatures were used to recognise natural and artificial materials in the 3D point cloud according to spectral similarity. Then, a parametrisation of Bidirectional Reflectance Distribution Function (BRDF) was carried out by sampling the BRDF space for each material. Consequently, each material is characterised by multiple samples with different incoming and outgoing angles. Finally, an analysis of BRDF sample completeness is performed considering four sunlight positions and 16x16 resolution for each material. The results demonstrated the capability of the used technology and the effectiveness of our method to be used in applications such as spectral rendering and real-word material acquisition and classification. (C) 2021 The Authors. Published by Elsevier Ltd.

Abstract
Hyperspectral aerial imagery is becoming increasingly available due to both technology evolution and a somewhat affordable price tag. However, selecting a proper UAV + hyperspectral sensor combo to use in specific contexts is still challenging and lacks proper documental support. While selecting an UAV is more straightforward as it mostly relates with sensor compatibility, autonomy, reliability and cost, a hyperspectral sensor has much more to be considered. This note provides an assessment of two hyperspectral sensors (push-broom and snapshot) regarding practicality and suitability, within a precision viticulture context. The aim is to provide researchers, agronomists, winegrowers and UAV pilots with dependable data collection protocols and methods, enabling them to achieve faster processing techniques and helping to integrate multiple data sources. Furthermore, both the benefits and drawbacks of using each technology within a precision viticulture context are also highlighted. Hyperspectral sensors, UAVs, flight operations, and the processing methodology for each imaging type' datasets are presented through a qualitative and quantitative analysis. For this purpose, four vineyards in two countries were selected as case studies. This supports the extrapolation of both advantages and issues related with the two types of hyperspectral sensors used, in different contexts. Sensors' performance was compared through the evaluation of field operations complexity, processing time and qualitative accuracy of the results, namely the quality of the generated hyperspectral mosaics. The results shown an overall excellent geometrical quality, with no distortions or overlapping faults for both technologies, using the proposed mosaicking process and reconstruction. By resorting to the multi-site assessment, the qualitative and quantitative exchange of information throughout the UAV hyperspectral community is facilitated. In addition, all the major benefits and drawbacks of each hyperspectral sensor regarding its operation and data features are identified. Lastly, the operational complexity in the context of precision agriculture is also presented.

Abstract
Three-dimensional (3D) image mapping of real-world scenarios has a great potential to provide the user with a more accurate scene understanding. This will enable, among others, unsupervised automatic sampling of meaningful material classes from the target area for adaptive semi-supervised deep learning techniques. This path is already being taken by the recent and fast-developing research in computational fields, however, some issues related to computationally expensive processes in the integration of multi-source sensing data remain. Recent studies focused on Earth observation and characterization are enhanced by the proliferation of Unmanned Aerial Vehicles (UAV) and sensors able to capture massive datasets with a high spatial resolution. In this scope, many approaches have been presented for 3D modeling, remote sensing, image processing and mapping, and multi-source data fusion. This survey aims to present a summary of previous work according to the most relevant contributions for the reconstruction and analysis of 3D models of real scenarios using multispectral, thermal and hyperspectral imagery. Surveyed applications are focused on agriculture and forestry since these fields concentrate most applications and are widely studied. Many challenges are currently being overcome by recent methods based on the reconstruction of multi-sensorial 3D scenarios. In parallel, the processing of large image datasets has recently been accelerated by General-Purpose Graphics Processing Unit (GPGPU) approaches that are also summarized in this work. Finally, as a conclusion, some open issues and future research directions are presented.