Abstract
In this paper is presented a methodology to identify and evaluate the influence of the external elements on the Transmission System Operator's (TSO) responsibility area. The algorithm is based on the influence factor approach and is described for this purpose. This algorithm offer a concrete support in the determination of the observability area, which at the end remains in the responsibility of a single TSO. The influence factor is a numerical value used to quantify the greatest effect of the outage of an external network component on any internal network branch. The proposed methodology was applied to identify and to assess the influence of the external elements on the Portuguese transmission network. All simulations of the Portuguese and Spanish systems were performed using the computational software package PSS/E of Siemens/PTI. The results obtained with the proposed methodology are compared with the solutions produced by the horizontal network methodology.

Abstract
A new strategy was purposed and is being tested during this year, to increase students' participation and promote continuous learning and students' engagement in master's courses classes. With the implementation of the Bologna Process, the spectra of students has increased, which increases the difficulties faced by the lecturers since these students present different backgrounds and knowledge, thereby increasing the number of hours necessary to assure the completion of the programs. A description of a new approach design to increase students' participation, which is being tested in three different Universities and Polytechnic Institutes in Portugal is presented in this paper and some preliminary results are discussed.

Abstract
This paper presents a study were the Rough Set Theory and Data Mining Technique are applied to the electrical power system. The Data Mining technique classifies the system operation in four possible states: normal, alert, emergency (emergency I and emergency II). The states, that correspond to the normal state can be classified as secure and insecure the remaining ones. In this security studies, the overloads in transmition lines and the violation of the voltage limits are used to classify and rank these contingencies. This technique was applied to the 118IEEE busbar test power network and the results obtained are analyzed. Finally, some conclusions that provide a valuable contribution to the understanding of the power system security analysis are pointed out. © 2013, Springer Science+Business Media Dordrecht.

Abstract
The constant changes occurring in today's teaching and learning processes provide a continuous improvement in the interaction of information. At the same time, globalization and the need for streamlining time facilitate the development of new methods of imparting knowledge. With the new information technologies, new forms of learning occur adding greater dynamism to the information. This form of learning, which optimizes time and space, is known as distance learning and it is being amply used in many different areas. Distance education presents the advantage of facilitating the teaching and learning processes without face-to-face interaction as knowledge is transmitted, partly or as a whole using technology. In fact, technological innovation has assumed a vital role in education. Looking to achieve more efficiency in carrying out the various activities, the job market constantly requires an investment in new skills and knowledge so that the professionals can operate the equipment and working tools, successfully and with quality. This paper presents a new system of learning a curricular unit of Circuit Theory using desktop virtual reality (VR). The software provides the possibility to understand the relationship between the physical concepts of an electrical circuit, direct or alternating current, through computer simulations and animations. This work was developed to demonstrate how a desktop VR prototype, "Virtual Electric Manual"-VEMA, can be applied to an engineering unit and used to enhance security and resourcefulness in using electrical equipment. Several interactive scenes were developed to illustrate the idea using a measurements and instrumentation laboratory as virtual environment. A range of interactive learning environments are presented: the menu with the first interactive experiment is the simulator of a DC circuit. It allows the student to analyze the setting up of a parallel, or series-parallel resistive circuit series powered by direct current; the second menu, features the simulator of an alternating current circuit and demonstrates how the student can perform the analysis of a circuit with resistors, inductors and capacitors; the third interactive experiment is the simulator of a three-phase alternating current circuit; the fourth menu refers to a study on the transitional phenomena. Finally, the fifth menu is an interactive experiment related to the phenomena of resonance. VEMA offers students the opportunity to understand the processes, helping them to better discern the procedures and trains them to interact with the equipment. The VEMA prototype addresses these issues and highlights the potential benefits of using VR for this purpose. Each experiment will provide technical and scientific knowledge in order to give the student/user adequate information and training in the subject.

Abstract
Higher education has evolved in the last decade with the use of information technology. This change was called distance education, a teaching method in which the student does not need to meet with the teacher on a certain day and time. The student may be either at home or at work and may have no interaction with the other parts, either the teacher or other students. It has allowed the institutions to resolve geographical gaps in order to reach the largest number of students. On the other hand, it paved the way for the "non-traditional" universities oriented for "adult work", in a narrow range of graduation programs, compatible with the current demands from industry. It is also important to mention that distance education is becoming increasingly appropriate for non-academic studies, such as corporate training environments. This paper addresses Circuit Theory systems, more specifically laboratory practices geared towards teaching and learning. The choice was made from observing the needs in the specific context of a measures and instrumentation laboratory, mainly related with access to the means and equipment to carry out laboratory practice. The purpose of the work is the use of virtual experimentation to carry out laboratory practice and also as an alternative tool to meet the needs of access to the means and equipment of the laboratory. In the present case, the basis of the project was the construction of a 3D lab environment (Measures and Instrumentation) where the equipment and the components can be seen and manipulated. The project involves simple electrical schematics, which later can be changed in values, presenting new results, and displays a set of menus and submenus to support experiments. The virtual laboratory can accommodate new devices and scenarios, being adapted to new subjects, such as electric machines and power system analysis of the Electrical Engineering program. This work was developed to demonstrate how a desktop VR prototype, "Virtual Electric Manual" - VEMA, can be applied to an engineering unit and used to enhance security and resourcefulness in using electrical equipment. Several interactive scenes were developed to illustrate the idea using a measurements and instrumentation laboratory as virtual environment. The added value of these various features in the educational context is that they contribute to the construction of new virtual environments, able to benefit the communication between teachers and students and among themselves, thus creating new opportunities for each student to participate more actively in his/her own learning construction process. Rather than being seen as mere information files, these e-learning platforms should be perceived as a means to promote interaction and experimentation through technological resources.

Abstract
This paper discusses the effective contribution of a Learning Object (LO) to teach circuit theory based on research conducted with students of higher education, and their interaction with a teacher of Electronics. From the results of such research, it is pointed out which features one wants in the LO so that it successfully promotes learning. It is in this perspective that this work was conceived having as goal the development of LO, admitting that this may be a possible alternative to represent models of interactions, which occur within the area, thereby improving understanding of physical concepts, in particular those involved with the subject of electrical circuits. It has also as objective to characterize the learning process through a series of situations that are replicated leading to a set of behaviors from the students. It is assumed that the use of this tool can lead to acquiring a specific set of skills, a better practice and meaningful learning.