Abstract
Inspired by observing the motions of vessels at sea, the E-Motions has been proposed as an innovative concept capable of converting wave (and wind) induced roll oscillations on multipurpose offshore floating platforms into electricity. The device can be integrated, theoretically, into any type of offshore floating structure, given its simple 3-component design: floating platform, encasing and sliding Power Take-Off. This latter component can be sheltered from the marine environment by being placed within a casing, at deck level, or the hull of the offshore structure. With so much potential for application at sea, it was important to subject the E-Motions to an initial proof-of-concept, as done for other wave energy converters. This paper presents and discusses the main results and conclusions of an experimental study, carried out with a 1:40 reduced scale physical model, aimed at demonstrating the technical and technological viability of the E-Motions. It was found that, for the considered study variables, the device can operate without major incident and convert electricity from wave induced roll oscillations. Four ballast configurations were considered, of which two yielded higher power outputs. The average measured power reached as high as 11 kW and 13 kW, respectively, with the values reducing for wave period further away from the resonance range and lower wave heights. Power Take-Off damping was found to be an important variable that can considerably influence the energy generation process, yet it will be imperative to further assess this variable in combination with other pertinent variables, such as an external attached mass and different generators. This is key to better understand and describe the complex and non-linear relationship between the motions of the Power Take-Off and the floating platform components.

Abstract
The world's population is estimated to reach nine billion people by the year 2050, which indicates that agricultural productivity must increase sustainably. The mechanisation and automatisation of agricultural tasks is an essential step to face population growth. Ground robots have been developed along the last decade for several agricultural applications, being, the autonomous and safe navigation one of the hardest challenge in this development. Moving autonomously, a mobile platform involves different tasks, such as localisation, mapping, motion control, and path planning, a crucial step for autonomous operations. This article performs a survey of different applications for path planning techniques applied to various agricultural contexts. This paper analyses different agricultural applications and details about the employed path planning method. The conclusion indicates that path planning has been successfully applied to agrarian robots for field coverage and point-to-point navigation, being that coverage path planning is slightly more advanced in this field.

Abstract
In the context of the digital society, educational systems should prepare the students to succeed in a really volatile environment. In order to do so they require to acquire some specific competences that use to be related to STEAM Education. However, integrating STEAM is hard and requires of new methodologies and tools. RoboSTEAM is an Erasmus+ project that aims to facilitate this by using Challenge Based Learning and applying Physical Devices and Robotics. In order to know if what RoboSTEAM proposes work properly it must be tested in different contexts with different educational systems. The results of these tests should be compared, which requires of a common knowledge background. In order to achieve it RoboSTEAM proposes students and teachers exchanges between similar and different sociocultural environments, so they can learn how other people work in the project challenges and if what they do can be addressed by them in a similar way. The present work describes these exchanges, how they were planned and carried out and the main results obtained. From the exchanges carried out until now it is possible to say that they facilitate sharing knowledge that later can lead to better results in the project challenges and that they are enriching experiences both for students and for teachers. © 2020, Springer Nature Switzerland AG.

Abstract

Abstract
Robotics will significantly impact large sectors of the economy with relatively low productivity, such as Agri-Food production. Deploying agricultural robots on the farm is still a challenging task. When it comes to localising the robot, there is a need for a preliminary map, which is obtained from a first robot visit to the farm. Mapping is a semi-autonomous task that requires a human operator to drive the robot throughout the environment using a control pad. Visual and geometric features are used by Simultaneous Localisation and Mapping (SLAM) Algorithms to model and recognise places, and track the robot's motion. In agricultural fields, this represents a time-consuming operation. This work proposes a novel solution-called AgRoBPP-bridge-to autonomously extract Occupancy Grid and Topological maps from satellites images. These preliminary maps are used by the robot in its first visit, reducing the need of human intervention and making the path planning algorithms more efficient. AgRoBPP-bridge consists of two stages: vineyards row detection and topological map extraction. For vineyards row detection, we explored two approaches, one that is based on conventional machine learning technique, by considering Support Vector Machine with Local Binary Pattern-based features, and another one found in deep learning techniques (ResNET and DenseNET). From the vineyards row detection, we extracted an occupation grid map and, by considering advanced image processing techniques and Voronoi diagrams concept, we obtained a topological map. Our results demonstrated an overall accuracy higher than 85% for detecting vineyards and free paths for robot navigation. The Support Vector Machine (SVM)-based approach demonstrated the best performance in terms of precision and computational resources consumption. AgRoBPP-bridge shows to be a relevant contribution to simplify the deployment of robots in agriculture.

Abstract
How to visualize recorded production data in Virtual Reality? How to use state of the art Augmented Reality displays that can show robot data? This paper introduces an open-source ICT framework approach for combining Unity-based Mixed Reality applications with robotic production equipment using ROS Industrial. This publication gives details on the implementation and demonstrates the use as a data analysis tool in the context of scientific exchange within the area of Mixed Reality enabled human-robot co-production.