Abstract
Early and accurate disease diagnosis is pivotal for effective phytosanitary management strategies in agriculture. Hyperspectral sensing has emerged as a promising tool for early disease detection, yet challenges remain in effectively harnessing its potential. This study compares parametric spectral Vegetation Indices (VIs) and a nonparametric Gaussian Process Classification based on an Automated Spectral Band Analysis Tool (GPC-BAT) for diagnosing plant bacterial diseases using hyperspectral data. The study conducted experiments on tomato plants in controlled conditions and kiwi plants in field settings to assess the performance of VIs and GPC-BAT. In the tomato experiment, the modeling processes were applied to classify the spectral data measured on the healthy class of plants (sprayed with water only) and discriminate them from the data captured on plants inoculated with the two bacterial suspensions (108 CFU mL-1). In the kiwi experiment, the standard modeling results of the spectral data collected on nonsymptomatic plants were compared to the ones obtained using symptomatic plants' spectral data. VIs, known for their simplicity in extracting biophysical information, successfully distinguished healthy and diseased tissues in both plant species. The overall accuracy achieved was 63% and 71% for tomato and kiwi, respectively. Limitations were observed, particularly in differentiating specific disease infections accurately. On the other hand, GPC-BAT, after feature reduction, showcased enhanced accuracy in identifying healthy and diseased tissues. The overall accuracy ranged from 70% to 75% in the tomato and kiwi case studies. Despite its effectiveness, the model faced challenges in accurately predicting certain disease infections, especially in the early stages. Comparative analysis revealed commonalities and differences in the spectral bands identified by both approaches, with overlaps in critical regions across plant species. Notably, these spectral regions corresponded to the absorption regions of various photosynthetic pigments and structural components affected by bacterial infections in plant leaves. The study underscores the potential of hyperspectral sensing in disease diagnosis and highlights the strengths and limitations of VIs and GPC-BAT. The identified spectral features hold biological significance, suggesting correlations between bacterial infections and alterations in plant pigments and structural components. Future research avenues could focus on refining these approaches for improved accuracy in diagnosing diverse plant-pathogen interactions, thereby aiding disease diagnosis. Specifically, efforts could be directed towards adapting these methodologies for early detection, even before symptom manifestation, to better manage agricultural diseases.

Abstract
Forest soil ripping is a practice that involves revolving the soil in a forest area to prepare it for planting or sowing operations. Advanced sensing systems may help in this kind of forestry operation to assure ideal ripping depth and intensity, as these are important aspects that have potential to minimise the environmental impact of forest soil ripping. In this work, a cost-effective contactless system - capable of detecting and mapping soil ripping depth in real-time - was developed and tested in laboratory and in a realistic forest scenario. The proposed system integrates two single-point LiDARs and a GNSS sensor. To evaluate the system, ground-truth data was manually collected on the field during the operation of the machine with a ripping implement. The proposed solution was tested in real conditions, and the results showed that the ripping depth was estimated with minimal error. The accuracy and mapping ripping depth ability of the low-cost sensor justify their use to support improved soil preparation with machines or robots toward sustainable forest industry.

Abstract
Precision spraying in agriculture is crucial for optimizing the application of pesticides while minimizing environmental impact. Despite significant advancements in control models for spraying systems, predictive control algorithms were not used. This paper addresses this gap by proposing a real-time control framework that integrates predictive control strategies to ensure consistent pressure output in a trailer sprayer. Based on information from various sensors, the framework anticipates and adapts to dynamic environmental conditions, enhancing accuracy and sustainability in spraying practices. A methodology is developed to define a proportional valve model. Based on this valve model, the predictive control model optimizes valve movements to minimize errors between predicted and reference pressures, thereby improving spraying efficiency. This study demonstrates the viability of predictive control in improving precision spraying systems applicable to autonomous robots, encouraging future advances in agricultural spraying technologies.

Abstract
Climate change, limited natural resources, and the increase in the world's population impose society to produce food more sustainably, with lower energy and water consumption. The use of robots in agriculture is one of the most promising solutions to change the paradigm of agricultural practices. Agricultural robots should be seen as a way to make jobs easier and lighter, and also a way for people who do not have agricultural skills to produce their food. The PixelCropRobot is a low-cost, open-source robot that can perform the processes of monitoring and watering plants in small gardens. This work proposes a mission supervisor for PixelCropRobot, and general agricultural robots, and presents a prototype of user interface to this mission supervision. The communication between the mission supervisor and the other components of the system is done using ROS2 and MQTT, and mission file standardized. The mission supervisor receives a prescription map, with information about the respective mission, and decomposes them into simple tasks. An A* algorithm then defines the priority of each mission that depends on factors like water requirements, and distance travelled. This concept of mission supervisor was deployed into the PixelCropRobot and was validated in real conditions, showing a enormous potential to be extended to other agricultural robots.

Abstract
Since the advent of agriculture, humans have considered phytopharmaceutical products to control pests and reduce losses in farming. Sometimes some of these products, such pesticides, can potentially harm the soil life. In the literature there is evidence that AI and image processing can have a positive contribution to reduce phytopharmaceutical losses, when used in variable rate sprayers. However, it is possible to improve the existing sprayer system's precision, accuracy, and mechanical aspects. This work proposes spraying solution called GraDeS solution (Grape Detection Sprayer). GraDeS solution is a sprayer with two degrees of freedom, controlled by a AI-based algorithm to precisely treat grape bunches diseases. The experiments with the designed sprayer showed two key points. First, the deep learning algorithm recognized and tracked grape bunches. Even with structure movement and bunch covering, the algorithm employs several strategies to keep track of the discovered objects. Second, the robotic sprayer can improve precision in specified areas, such as exclusively spraying grape bunches. Because of the structure's reduced size, the system can be used in medium and small robots.

Abstract
Data scarcity is a hurdle for physiology-based precision agriculture. Measuring nutrient uptake by visible-near infrared spectroscopy implies collecting spectral and compositional data from low-throughput, such as inductively coupled plasma optical emission spectroscopy. This paper introduces data augmentation in spectroscopy by hybridisation for expanding real-world data into synthetic datasets statistically representative of the real data, allowing the quantification of macronutrients (N, P, K, Ca, Mg, and S) and micronutrients (Fe, Mn, Zn, Cu, and B). Partial least squares (PLS), local partial least squares (LocPLS), and self-learning artificial intelligence (SLAI) were used to determine the capacity to expand the knowledge base. PLS using only real-world data (RWD) cannot quantify some nutrients (N and Cu in grapevine leaves and K, Ca, Mg, S, and Cu in apple tree leaves). The synthetic dataset of the study allowed predicting real-world leaf composition of macronutrients (N, P, K, Ca, Mg and S) (Pearson coefficient correlation (R) 0.61-0.94 and standard error (SE) 0.04-0.05%) and micronutrients (Fe, Mn, Zn, Cu and B) (R 0.66-0.91 and SE 0.88-3.98 ppm) in grapevine leaves using LocPLS and SLAI. The synthetic dataset loses significance if the real-world counterpart has low representativity, resulting in poor quantifications of macronutrients (R 0.51-0.72 and SE 0.02-0.13%) and micronutrients (R 0.53-0.76 and SE 8.89-37.89 ppm), and not allowing S quantification (R = 0.37, SE = 0.01) in apple tree leaves. Representative real-world sampling makes data augmentation in spectroscopy very efficient in expanding the knowledge base and nutrient quantifications.