Abstract
Soil contamination with metals is a major threat for the environment and public health since most metals are toxic to humans and to non-human biota, even at low concentrations. Thus, new sustainable remediation approaches are currently needed to immobilize metals in soils to decrease their mobility and bioavailability. In this work, we explore the application of discarded substrates from hydroponic cultivation, namely coconut shell and a mixture of coconut shell and pine bark, for immobilization of metals (Cd, Cr, Ni, Cu, Pb, Hg, Sb and As) in a naturally contaminated soil from a mining region in Portugal. The immobilization capacity of substrates (added to the soil at 5% mass ratio) was assessed both individually and also combined with other traditional agriculture soil additives (limestone and gypsum, at 2% mass ratio) and nanoparticles of zero-valent iron (nZVI) at 1–3% mass ratio. The overall results obtained after a 30-d incubation showed that the discarded substrates are a viable, economic, and environmental-friendly solution for metal remediation in soils, with the capacity of immobilization ranging from 20 to 91% for the metals and metalloids studied. Furthermore, they showed the capacity to reduce the soil toxicity (EC50 ~ 6000 mg/L) to non-toxic levels (EC50 > 10000 mg/L) to the bacteria Aliivrio fischeri. © 2024 The Authors

Abstract
The development of simple, selective, and cost-effective methods for quantification of bovine serum albumin (BSA) is currently very important for assessing milk quality (and safety). In this work, a new surface plasmon resonance (SPR) sensor was developed, consisting of imprinted hydrogel-based nanoparticles (nanoMIPs) immobilized on gold platforms, to quantify BSA in bovine milk. The nanoMIPs prepared for recognition of BSA were synthesized by the precipitation polymerization approach, using a synthetic BSA epitope (VVSTQTALA) as template. The spherical MIP nanoparticles (NPs) had an average size of 60 nm. The binding studies performed revealed that the binding affinity of the prepared nanoMIPs to BSA (KD = 7.1 × 10-6 mol L-1) was comparable to that obtained by a natural BSA antibody (KD = 2.5 × 10-6 mol L-1). The plasmonic sensor incorporating the MIP nanomaterials achieved a limit of detection (LOD) of 1.02 × 10-6 mol L-1 (0.068 mg mL-1) and a limit of quantification (LOQ) of 3.39 × 10-6 mol L-1 (0.225 mg mL-1), over a linear range from 2.0 × 10-6 mol L-1 to 1.5 × 10-5 mol L-1. Moreover, the selectivity studies revealed a significant sensor response towards casein and a negligible response towards vancomycin. In the end, the optical sensor was tested against commercial milk samples, showing promising viability for detection of BSA as the value reported by the plasmonic sensor ((1.0 ± 0.1) × 10-4 mol L-1) was very close to that obtained by size exclusion-high-performance liquid chromatography (SEC-HPLC). © 2025 The Author(s)

Abstract

Abstract
Hydroponics is an advanced agricultural technique that involves growing plants without soil. Instead, plants are cultivated in a nutrient-rich water solution that provides all the essential minerals they need to thrive, allowing plants to grow either with their roots directly in the solution or supported by inert substrates like pine bark, coconut husk fiber, and rice husk. The solid waste generated from hydroponic cultivation is valuable due to its low cost, abundance, biodegradability, and renewability. These residues are rich in lignocellulosic materials, which can be extracted and refined to produce cellulose and nanocellulose (NC). In this work, cellulose and nanocellulose were extracted from residues of coconut husk fiber and a mixture of pine bark and coconut husk fiber, used in tomato and strawberry hydroponics, respectively. The residues were ground, washed, and chemically treated to obtain cellulose and NC. The chemical process involved several stages: (i) acid treatment, alkaline treatment, and bleaching to isolate cellulose, and (ii) acid hydrolysis followed by ultrasonication to obtain NC. Both materials underwent characterization using various techniques such as TGA, DSC, XRD and FTIR-ATR, which confirmed very low levels of lignin and hemicellulose. Morphological characterization through SEM revealed the presence of micro- and nano-crystals in the cellulose and NC samples, respectively, highlighting the effectiveness of the extraction method. The high purity and quality of the extracted materials make them competitive with commercially available products, suitable for applications in healthcare, food packaging, and automotive industries, while supporting recycling and reuse principles.

Abstract
Active and abandoned mining sites are significant sources of heavy metals and metalloid pollution, leading to serious environmental issues. This study assessed the environmental risks posed by potentially toxic elements (PTEs), specifically arsenic (As) and antimony (Sb), in the Technosols (mining residues) of the former Pej & atilde;o coal mine complex in Northern Portugal, a site impacted by forest wildfires in October 2017 that triggered underground combustion within the waste heaps. Our methodology involved determining the pseudo-total concentrations of As and Sb in the collected heap samples using microwave digestion with aqua regia (ISO 12914), followed by analysis using hydride generation-atomic absorption spectroscopy (HG-AAS). The concentrations of As an Sb ranging from 31.0 to 68.6 mg kg-1 and 4.8 to 8.3 mg kg-1, respectively, were found to be above the European background values reported in project FOREGS (11.6 mg kg-1 for As and 1.04 mg kg-1 for Sb) and Portuguese Environment Agency (APA) reference values for agricultural soils (11 mg kg-1 for As and 7.5 mg kg-1 for Sb), indicating significant enrichment of these PTEs. Based on average Igeo values, As contamination overall was classified as unpolluted to moderately polluted while Sb contamination was classified as moderately polluted in the waste pile samples and unpolluted to moderately polluted in the downhill soil samples. However, total PTE content alone is insufficient for a comprehensive environmental risk assessment. Therefore, further studies on As and Sb fractionation and speciation were conducted using the Shiowatana sequential extraction procedure (SEP). The results showed that As and Sb levels in the more mobile fractions were not significant. This suggests that the enrichment in the burned (BCW) and unburned (UCW) coal waste areas of the mine is likely due to the stockpiling of lithic fragments, primarily coals hosting arsenian pyrites and stibnite which largely traps these elements within its crystalline structure. The observed enrichment in downhill soils (DS) is attributed to mechanical weathering, rock fragment erosion, and transport processes. Given the strong association of these elements with solid phases, the risk of leaching into surface waters and aquifers is considered low. This work underscores the importance of a holistic approach to environmental risk assessment at former mining sites, contributing to the development of sustainable remediation strategies for long-term environmental protection.

Abstract
In this work, three universally used redox probes in amperometric biosensing devices, [Fe(CN)(6)](3-)/[Fe(CN)(6)](4-), Ru[(NH3)(6)](3+), and ferrocenedimethanol (FDM), were selected to evaluate the stability of electrochemical signals provide by the reporting systems. Studies were carried out at disposable gold screen-printed electrode (AuSPE) biosensing platforms, commonly used for screening chemical and biological relevant biomolecules. Firstly, electrochemical combined-surface plasmon resonance (eSPR) studies were performed to evaluated adsorption reversibility and/or formation of redox probe complexes at the bare gold surface when routinely used electrochemical techniques, namely cyclic voltammetry (CV) and square-wave voltammetry (SWV), are recorded. Then, the results obtained were compared with those obtained at the AuSPE under the same electrochemical conditions. Based on our findings, best experimental conditions, including the type of electrochemical technique used, are speculated for each reporting system in order to improve the analytical signal stability. Finally, a methodology based on SWV technique was applied to modified electrodes to provide a simple and easy tool to ensure diffusion controlled permeability of probes thorough the films to electrode surface.