Abstract
In this paper it is presented an all-fiber implementation of the hot-wire needle probe concept, widely used to measure the thermal properties of materials, particularly the thermal conductivity. It is based on the heating of a metal thin film deposited on the surface of the fiber induced by the coupling of laser light into the cladding via a long period grating, and determination, using a fiber Bragg grating, of the time dependence of the temperature of the surrounding medium at a fixed distance of the fiber. The medium considered in this research was the air and the results obtained indicate the feasibility of this approach and point out future developments.

Abstract
A sensing configuration for fluid evaporation monitoring using a suspended-core fiber tip is proposed. Strong differences between the evaporation processes of acetone and isopropyl alcohol were observed, both in terms of the signal's intensity fluctuations and total duration. In each fluid, the main signal variations were due to changes in reflectivity inside a collapsed region of the suspended-core fiber near the spliced interface with a standard single-mode fiber. After further analysis with a wider array of substances, this configuration could, in the future, be used to detect and study the evaporation of different volatile organic compounds. (C) 2014 Optical Society of America

Abstract
In this work, an all-fiber loop mirror using a four-bridge silica fiber with a double-Y-shaped suspended-core is presented for the measurement of strain and torsion. The sensing head is formed by a section of the microstructured fiber with 90 mm in length. The fiber loop sensor allowed observing a distinct interference pattern as a result of the geometry of the core fiber. Different sensitivities to strain and torsion were obtained, namely, -5.11 pm/mu e and +/- 1.34 pm/degree.

Abstract
An effective analytical model combining geometrical optics with the transfer-matrix theory for stratified optical media is applied to investigate the sensing properties of tapered optical fiber surface plasmon resonance (SPR) sensors incorporating Ag-Au bimetallic layers, particularly in the context of phase interrogation. The performance of the sensing structures is studied as a function of the tapering parameters and thickness of the metallic layers. It is shown that the Ag-Au bimetallic combination is capable of improving the resolution and tuning working region of SPR fiber-optic sensors and that by tapering the sensing structures enhanced sensitivity can be achieved when phase interrogation is considered.

Abstract
Optical fiber sensors based on the phenomenon of plasmonic resonance can be interrogated applying different methods, the most common one being the spectral approach where the measurand information is derived from the reading of the wavelength resonance dip. In principle, a far better performance can be achieved considering the reading of the phase of the light at a specific wavelength located within the spectral plasmonic resonance. This approach is investigated in this work for surface plasmon based fiber optic sensors with overlays which are combinations of bimetallic layers, permitting not only to tune the wavelength of the plasmon resonance but also the sensitivity associated with the phase interrogation of the sensors. The metals considered for the present analysis are silver, gold, copper, and aluminum.

Abstract
An optical fiber sensor based on arrays of silica microspheres is proposed. The microspheres are produced separately using a fusion splicer and then also connected in series by fusion splicing. Three different sensors are presented, differing by the number of microspheres. Due to the geometry of the structures, different behaviors are obtained in strain measurements. Sensors with an odd number of microspheres are more sensitive to strain than the ones with an even number of microspheres. Additionally, the sensing heads are subjected to temperature where a sensitivity of 20.3 pm/degrees C is obtained in a range of 200 degrees C. (C) 2014 Optical Society of America